Fuel Temperature Sensor
Show/hide table
 | |
| 图 1 | g01448886 |
(1) 温度传感器总成的最终安装扭矩 ... 6 ± 1 N·m (55 ± 9 lb in)
输出类型 ... 被动
工作温度 ... −40 至 150°C (−40 至 302 °F)
Caterpillar Information System:
Installation of a 3306 Engine Emissions Upgrade Group for a 12G Motor Grader{1000} Installation of a 3306 Engine Emissions Upgrade Group for a 12G Motor Grader{1000}
C7 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
730 EJECTOR Articulated Truck Machine Systems Fan Drive System
730 EJECTOR Articulated Truck Frame and Body - Inspect
730 EJECTOR Articulated Truck Tailgate - Lubricate
C7 Engines for Caterpillar Built Machines Camshaft - Install
730 EJECTOR Articulated Truck Ejector Cylinder Pivot - Lubricate
C7 Engines for Caterpillar Built Machines Camshaft - Remove
C18 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
C7 Engines for Caterpillar Built Machines Lifter Group - Remove and Install
2005/04/25 New Warning Indicator Module is Now Used {7431}
730C2 EJECTOR Articulated Truck Ejector Blade Alignment - Check/Adjust
12M, 140M and 160M Motor Graders Hydraulic and Steering System Location Of Components
C9 Engines for Caterpillar Built Machines Electronic Control Module - Remove and Install
PM-201 Cold Planer Machine Systems Metering Pump (Steering)
C18 Engines for Caterpillar Built Machines Engine Pressure Sensor Open or Short Circuit - Test
PM-201 Cold Planer Machine Systems Center Valve
PM-201 Cold Planer Machine Systems Rear Valve
PM-201 Cold Planer Machine Systems Auxiliary Pump
PM-201 Cold Planer Machine Systems Relief Valve (Steering)
PM-201 Cold Planer Machine Systems Control Valve (Moldboard)
R2900G Load Haul Dump Machine Systems Ride Control Accumulator - Remove
R2900G Load Haul Dump Machine Systems Ride Control Accumulator - Install
C18 Engines for Caterpillar Built Machines Coolant Flow Switch Circuit - Test