Footshaft - Assemble
组装步骤
Show/hide table
所需工具     | |||
---|---|---|---|
工具     | 零件号     | 零件描述     | 数量     |
A     | 5P-3413     | 管密封胶     | 1     |
B     | 2S-3230     | 轴承润滑油     | 1     |
注: 检查 O 形密封圈、垫片和密封件有无磨损或损坏。 如有必要,请更换部件。
- 安装垫圈 (15) 、轴 (11) 和螺母 (16) 。 将螺母 (16) 拧紧至 408 N·m (300 lb ft) 的扭矩。
Show/hide table
图 1 | g01141663 |
- 将工具 (A) 涂覆到 90 度弯管 (13) 上。 将 90 度弯管 (13) 安装到轴 (11) 中。
Show/hide table
图 2 | g01141610 |
- 将 O 形密封圈 (14) 安装到 90 度弯管 (13) 中。
- 将垫片 (1) 和隔套 (12) 安装到轴 (11) 上。
Show/hide table
图 3 | g01141607 |
- 将工具 (B) 涂覆到轴承内圈 (10) 上。 将轴承内圈 (10) 安装到轴 (11) 上。
Show/hide table
图 4 | g01141606 |
- 将轴承外圈 (9) 安装到支重轮 (7) 中。
Show/hide table
图 5 | g01141605 |
- 将工具 (B) 涂覆到轴承内圈 (8) 上。 将轴承内圈 (8) 安装到支重轮 (7) 中。
Show/hide table
图 6 | g01141603 |
- 安装锁紧垫圈 (6) 。
Show/hide table
图 7 | g01141598 |
- 安装止动舌垫圈 (5) 。
Show/hide table
图 8 | g01141594 |
- 安装锁紧螺母 (4) 。 旋转轴承,然后将锁紧螺母 (4) 拧紧至 23 N·m (200 lb in) 的扭矩。
Show/hide table
图 9 | g01141590 |
- 松开锁紧螺母 (4) ,然后将锁紧螺母 (4) 拧紧至 6 N·m (50 lb in) 和 8 N·m (75 lb in) 的扭矩。 与止动舌垫圈 (5) 上最近的止动舌对齐。
- 弯曲止动舌垫圈 (5) 上的舌片。
- 将膨胀塞 (2) 安装到支重轮 (3) 中。
Show/hide table
图 10 | g01141563 |
- 弯曲垫片 (1) 。
Show/hide table
图 11 | g01141554 |
- 重复步骤 1 至 14。
Caterpillar Information System:
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Install
AP500F Asphalt Paver Machine Systems Footshaft - Disassemble
C15 and C18 Engines for Caterpillar Built Machines CID 0549 FMI 02 Incorrect Throttle Lock Switch inputs
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Auxiliary) - Remove
3054E Engines for Caterpillar Built Machines Engine Speed - Check
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Footshaft - Install
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Left Propel) - Install
C7 Engine for 584 and 584HD Forwarders and for 525C, 535C, and 545C Wheel Skidders E390 Fuel Filter Restriction
C27 and C32 Engines for Caterpillar Built Machines E362 Engine Overspeed
C27 and C32 Generator Set Engines E361 High Engine Coolant Temperature
C27 and C32 Engines for Caterpillar Built Machines E194 High Exhaust Temperature
C15 and C18 Engines for Caterpillar Built Machines CID 1756 FMI 06 Start Aid Indicator short to ground
C15 and C18 Engines for Caterpillar Built Machines Electrical Power Supply Circuit - Test
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Plates (Drag Pans) - Remove and Install
R2900G Load Haul Dump Braking System Pressure Switch (Brake Accumulator Oil)
988G Wheel Loader Power Train Output Transfer Gears - Assemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Drive - Assemble
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Remove
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Air Cleaner
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Rotor Stub Shaft
3054E Engines for Caterpillar Built Machines Valve Depth - Inspect
AP-1055D and BG-2455D Asphalt Pavers Machine Systems Piston Pump (Right Propel) - Install
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Swing Gear and Bearing - Remove