Pressure Switch (Service Brake Oil)
Show/hide table
| |
| Illustration 1 | g01031733 |
The service brake oil pressure switch is installed with the service brake control valve. The service brake control valve is located under the operator station.
Show/hide table
| |
| Illustration 2 | g01139298 |
| (1) Service brake oil pressure switch | |
The service brake oil pressure switch senses oil pressure in the service brake circuit. The service brake oil pressure switch is an input of the Power Train Electronic Control Module.
Reference: For information on the brake oil pressure switch, refer to Power Train Electronic Control System, Systems Operation, Troubleshooting, Testing and Adjusting, "Switches".
Caterpillar Information System:
R2900G Load Haul Dump Engine and Machine Warm-Up
R2900G Load Haul Dump Starting the Engine
R2900G Load Haul Dump Braking System Parking Brake - Manual Release
R2900G Load Haul Dump Bucket Control Group Safety Pins
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Saw) - Install
Oil Volumes for Track Link Assemblies {4169} Oil Volumes for Track Link Assemblies {4169}
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Piston Pump (Saw) - Remove
2005/04/11 A Special instruction, REHS2561, "Field Installation of the 255-7115 Equalizer Bar As " Is Available {7206}
C7 Engine for AP-1000D, AP-1055D, BG-2455D, and BG-260D Asphalt Pavers E362 Engine Overspeed
AP1055D and BG2455D Asphalt Pavers Engine Supplement Gear Pump (Fan Drive) - Assemble
C9 Engine for Caterpillar Built Machines System Configuration Parameters
Installing the 266-9184 Cab Heater and Mounting Kit {7304} Installing the 266-9184 Cab Heater and Mounting Kit {7304}
R2900G Load Haul Dump Stopping the Machine
C11 and C15 Engines for Caterpillar Built Machines 5 Volt Engine Pressure Sensor Supply Circuit - Test
2005/01/31 Procedure for Installing the Topcon 5 Contact Sensor {7220}
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Felling Head - Remove
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Felling Head - Install
539 Knuckleboom Loader Fuel Tank Cap and Strainer - Clean
C11 and C15 Engines for Caterpillar Built Machines Cat Data Link Circuit - Test
12M Motor Grader Shipping the Machine
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Electrohydraulic Control (Joystick) - Remove
834H Wheel Dozer and 836H Landfill Compactor Machine Systems Electrohydraulic Control (Joystick) - Install
C11 and C15 Engines for Caterpillar Built Machines Coolant Flow Switch Circuit - Test
TK741, TK751 and TK752 Track Feller Bunchers Machine Systems Tilt Cylinder (Saw) - Remove and Install