2005/01/17 Caterpillar


The Slack Adjusters Have a New Housing {4261}

Usage:

793B 1HL
Off-Highway Truck:
789 (S/N: 9ZC1-UP)
789B (S/N: 7EK1-UP)
789C (S/N: 2BW1-UP)
793 (S/N: 3SJ1-UP)
793B (S/N: 1HL1-UP)
793C (S/N: CBR1-UP; 4AR1-UP; ATY1-UP; 4GZ1-UP)
793C EQ (S/N: CBR1-UP)

Description of Change: The slack adjusters have a new housing. The slack adjusters are on the front service brakes.

Adaptable To: The new 245-3683 Housing is a direct replacement for the former 8W-2883 Housing. The housing is part of 5T-7670 Slack Adjuster Gp and 205-0560 Slack Adjuster Gp. The new 245-3683 Housing is effective with the following off-highway trucks: 789C (S/N: 2BW681-UP), 793C (S/N: ATY728-UP) and 793C EQ (S/N: CBR104-UP). The new 245-3683 Housing is adaptable to all earlier affected off-highway trucks.

Caterpillar Information System:

988H and 988K Wheel Loaders Power Train Transmission to Input Transfer Gears and Output Transfer Gears - Connect
793C and 793C XQ Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Engine Vision Interface Module
AP1055D and BG2455D Asphalt Pavers Engine Supplement Gear Pump (Fan Drive) - Install
C27 and C32 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Global Positioning System Interface Module
C11 and C15 Engines for Caterpillar Built Machines CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines Camshaft - Install
988H and 988K Wheel Loaders Power Train Transmission from Input Transfer Gears and Output Transfer Gears - Separate
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348} Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
725 and 730 Articulated Trucks Brake Pads - Check
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Inlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Check and Relief Valves
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Outlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Main Control Valve (Implement)
C7 and C9 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
TK741, TK751 and TK752 Track Feller Bunchers Engine Supplement Hood Tilt Actuator - Remove and Install
797B Off-Highway Truck Fan Drive Hydraulic System Hydraulic Tank
789C Off-Highway Truck Seat
735 and 740 Articulated Trucks Transmission Control
R2900G Load Haul Dump Hydraulic System Selector and Pressure Control Valve
R2900G Load Haul Dump Hydraulic System General Information
R1300G Series II Load Haul Dump Crankshaft Vibration Damper - Inspect
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.