C11 and C15 Engines for Caterpillar Built Machines Caterpillar


CID 0091 FMI 08 Throttle Position signal abnormal

Usage:

740 GC 3F8
产生此代码的情况:

电子控制模块(ECM)可检测以下状况:

  • 占空比大于 95% 或小于 7% 持续一秒钟,或者传感器频率大于 1000 Hz 或小于 150 Hz 持续两秒钟。

  • ECM 至少已通电三秒钟。

系统响应:

ECM 将理想发动机转速设定为编程设定的低怠速。 出现此活动诊断代码时,Caterpillar 电子技师(ET)将会指示油门位置为 0 %。

在此诊断代码为激活状态时,发动机将会保持在低怠速运转。

测试步骤 1. 进行以下的诊断步骤: 油门位置传感器电路 - 测试

结果:

  • 正常 - 停止

Caterpillar Information System:

C11 and C13 Engines for Caterpillar Built Machines Camshaft - Install
988H and 988K Wheel Loaders Power Train Transmission from Input Transfer Gears and Output Transfer Gears - Separate
Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348} Installation Instructions for the 267-6573 Camera Ar (Kit){7347, 7348}
725 and 730 Articulated Trucks Brake Pads - Check
307D, 311D, 312D, 313D, 315D, 318D, 319D, 320D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 340D, 345D, 349D, 374D, 390D and M325D Excavators Air Conditioning and Heating Air Conditioning System Troubleshooting
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Install
3516B and 3516B HD Engines and 994D, 994F, and 994H Wheel Loaders Oil Renewal System
793C Off-Highway Truck Air/Hydraulic Cylinder Breather - Clean
C11 and C13 Engines for Caterpillar Built Machines Rocker Shaft and Pushrod - Remove
C11 and C15 Engines for Caterpillar Built Machines E035 Loss of Coolant Flow Warning
2005/05/23 A New Tool is Available for Testing and Adjusting the Hydraulic System Pressure of the Auger Drive on the Asphalt Paver {5117}
3406C Engines for Caterpillar Built Machines Flywheel
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Global Positioning System Interface Module
C27 and C32 Engines for Caterpillar Built Machines E172 High Air Filter Restriction
AP1055D and BG2455D Asphalt Pavers Engine Supplement Gear Pump (Fan Drive) - Install
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines Engine Vision Interface Module
793C and 793C XQ Off-Highway Truck Suspension Cylinder Valve (Suspension Cylinder Charging)
988H and 988K Wheel Loaders Power Train Transmission to Input Transfer Gears and Output Transfer Gears - Connect
2005/01/17 The Slack Adjusters Have a New Housing {4261}
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Inlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Check and Relief Valves
TH220B, TH330B and TH340B Telehandlers Hydraulic System Manifold Valve (Outlet)
TH220B, TH330B and TH340B Telehandlers Hydraulic System Main Control Valve (Implement)
C7 and C9 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.