C27 and C32 Engines for Caterpillar Built Machines Caterpillar


Cylinder Liner

Usage:

854K 221


Ilustrasi 1g03408783

Tabel 1
Spesifikasi untuk 253-8766 Liner Blok Silinder, 215-2985 Liner Blok Silinder, dan 322-1126 Liner Blok Silinder 
Item  Jml  Suku Cadang  Keterangan Spesifikasi 
Lubang liner baru memiliki diameter 145.000 ± 0.025 mm (5.7086 ± 0.0010 inch)
Flensa pada liner memiliki ketebalan 8.890 ± 0.020 mm (0.3500 ± 0.0008 inch).
Ketebalan minimum dari bagian yang dapat digunakan kembali adalah 8.870 mm (0.3492 inch)
Gunakan prosedur berikut untuk memasang liner silinder ke blok silinder:
1. Aplikasikan 5P-3975 Pelumas Karet pada permukaan lubang liner silinder. Aplikasikan 5P-3975 Pelumas Karet pada seal karet di bagian bawah liner silinder.
2. Masukkan sepenuhnya pita pengisian (1) sebentar ke dalam oli engine yang bersih.
3. Pasang segera pita pengisian di alur di bawah flensa liner.
4. Pasang segera liner di lubang, sebelum pita pengisian mengembang. 
Rujuk ke Panduan Untuk Komponen Pakai Ulang, SEBF8068, "Cylinder Liners" untuk informasi selengkapnya. Selain itu, rujuk ke Pengujian dan Penyetelan, "Proyeksi Liner Silinder - Inspeksi" untuk prosedur pemeriksaan proyeksi liner silinder. 

Caterpillar Information System:

C15 and C18 Engines for Caterpillar Built Machines Prelubrication System - Test
267B, 277B and 287B Multi Terrain Loaders Machine Systems Hydrostatic System
834H Wheel Dozer and 836H Landfill Compactor Braking System General Information
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Install
PS-360C Pneumatic Compactor Machine System Pressure Switch (Air on the Run System Pressure) - Test and Adjust
PS-360C Pneumatic Compactor Machine System Air on the Run System Troubleshooting
267B, 277B and 287B Multi Terrain Loaders Machine Systems Pilot Hydraulic System
2004/10/18 Correction to Operation and Maintenance Manual , "Tire Inflation Information" {4203}
C11 and C15 Engines for Caterpillar Built Machines Injector Solenoid Circuit - Test
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Engine Supplement Hydraulic and Transmission Oil Cooler - Remove
583T Pipelayer Power Train Main Drive Shaft - Remove and Install
PS-360C Pneumatic Compactor Machine System Check Valves (Air on the Run) - Check
267B, 277B and 287B Multi Terrain Loaders Machine Systems Piston Pump (Hydrostatic)
C27 and C32 Engines for Caterpillar Built Machines Crankshaft
267B, 277B and 287B Multi Terrain Loaders Machine Systems Work Tool Hydraulic System
725 and 730 Articulated Trucks Fuses - Replace
725 and 730 Articulated Trucks Radiator Core - Clean
PS-360C Pneumatic Compactor Machine System Air on the Run System - If Equipped
14M and 16M Motor Graders Gear Pump (Transmission Charging and Scavenge)
AP-1055D and BG-2455D Asphalt Pavers Battery Disconnect Switch
988H Wheel Loader Braking System Monitoring System (Brake Functions)
RM-500 Road Reclaimer/Soil Stabilizer Machine Systems Piston Pump (Hydraulic Fan)
14M Motor Grader Circuit Breakers - Reset
988H Wheel Loader Braking System Brake Accumulator
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.