Steering and Transmission Hand Control
Show/hide table
| 图 1 | g01829962 |
(1) 螺钉的扭矩 ... 2.25 ± 0.6 N·m (20 ± 5 lb in)
(2) 2 只螺母的扭矩 ... 0.8 ± 0.1 N·m (7.1 ± 0.9 lb in)
(3) 将手柄上的白色标记与盖上的 "N" 的中心对准，并保持在 ± 5°范围内。
(4) 在拧紧位置 (5) 上螺栓前拧紧这个位置上的两颗螺钉。
(5) 拧紧螺钉。 保持间隙 (A) 。 ... 0.25 ± 0.25 mm (0.01 ± 0.01 in)
(6) 将 155-0695 螺纹锁固胶 、 154-9731 螺纹锁固胶 或 185-3998 螺纹锁固胶 涂覆到螺钉上。 螺钉的扭矩 ... 4 ± 0.7 N·m (35.4 ± 6.2 lb in)
(7) 螺母的扭矩 ... 6 ± 2 N·m (53 ± 18 lb in)
(8) 将 4C-4030 螺纹锁固胶 、 9S-3263 螺纹锁固胶 或 185-3996 螺纹锁固胶 涂覆到两颗螺栓上。 螺栓的扭矩 ... 10 ± 3 N·m (89 ± 27 lb in)
Caterpillar Information System:
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System Electronic Control Module (ECM)
583T Pipelayer Power Train Drive Shaft
PL83 and PL87 Pipelayer Systems Bevel and Transfer Gears
3306C Engines for Caterpillar Built Machines Turbocharger
D8T TRACK-TYPE TRACTORS Machine Systems Transmission Mounting
583T Pipelayer Power Train Transmission
583T Pipelayer Power Train Transmission System Oil Filter
583T Pipelayer Power Train Priority Valve
583T Pipelayer Power Train Relief Valve (Main)
583T Pipelayer Power Train Transmission Hydraulic Control
AP-1000B, AP-1050B, AP-1055B, AP-650B, BG-225C, BG-2455C, BG-245C and BG-260C Asphalt Pavers Propel Electronic Control System Motor Displacement Control
PL83 and PL87 Pipelayer Systems Relief Valve (Torque Converter Outlet)
Asphalt Pavers Burner Electronic Control System Right Extender Burner Control
2006/02/27 Engaging the High Flow Auxiliary Circuit {1408, 5705, 7610}
C7 Engines for Caterpillar Built Machines Lifter Group
C9 Industrial Engines Alternator and Regulator
14M and 16M Motor Graders Location of Components
PF-300C and PS-300C Pneumatic Compactors Engine Supplement Engine and Transmission - Remove
120M and 12M Motor Graders Braking and Hydraulic Fan System Shuttle Valve (Brake Accumulator)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Hydraulic and Steering System Oil Filter (Hydraulic)
AP-650B and BG-225C Asphalt Pavers Tow Point Cylinders
2004/12/13 New Software Improves the Function of the Oil Renewal System (ORS) {7620}
2004/10/01 A New Fuel Transfer Pump is Used {1256}
2004/10/04 A New Fuel Transfer Pump is Used {1256}