CB-434D and CB-434D XW Vibratory Compactor Machine Systems Caterpillar


Direction and Speed Control - Remove and Install

Usage:

CB-434D CNH

Removal Procedure

Note: Put identification marks on all hoses, on all hose assemblies, on all wires, and on all tube assemblies for installation purposes. Plug all hose assemblies and all tube assemblies. This helps to prevent fluid loss, and this helps to keep contaminants from entering the system.




    Illustration 1g01090970

  1. Remove bolts (1) and operator console (2) .



    Illustration 2g01091012

  1. Disconnect harness assemblies (3) .



    Illustration 3g01091019

  1. Disconnect harness assembly (4) .



    Illustration 4g01091025

  1. Remove bolts (6) and direction and speed control (5) .

Installation Procedure




    Illustration 5g01091025

  1. Install direction and speed control (5) . Install bolts (6) .



    Illustration 6g01091019

  1. Connect harness assembly (4) .



    Illustration 7g01091012

  1. Connect harness assemblies (3) .



    Illustration 8g01090970

  1. Install operator console (2) . Install bolts (1) .

Caterpillar Information System:

CB-434D and CB-434D XW Vibratory Compactor Machine Systems Seat - Remove and Install
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Additive Tank - Install
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Sensors
416E, 422E and 428E Backhoe Loaders Backhoe Auxiliary Control (Foot Operated) - If Equipped
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Licensing
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems Brake Control Valve (Service)
CB-334E Series II and CB-335E Series II Paving Compactors Seat
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hoist Cylinder
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems Hydraulic Tank
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Install
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Direction and Speed Control - Assemble
446D Backhoe Loader Machine Systems Pilot Valve (Backhoe) - Assemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Remove
416E Backhoe Loader Joystick Control (Loader)
CB-334E Series II and CB-335E Series II Paving Compactors Engine Starting
CB-334E Series II and CB-335E Series II Paving Compactors Stopping the Machine
CB-334E and CB-335E Paving Compactors Capacities (Refill)
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Remove
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Remove
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Assemble
2004/08/02 Correction to Disassembly and Assembly , "Piston Pump (Brake) - Assemble" {4268, 5070}
2004/08/02 Correction to Disassembly and Assembly , "Piston Pump (Brake) - Assemble" {4268, 5070}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.