Additive Tank - Install
Installation Procedure
- Install additive tank (20) in rear frame (7) .
Show/hide table
 | |
| Illustration 1 | g01090817 |
- Thread all hose assemblies (19) into the rear frame (7) .
Show/hide table
 | |
| Illustration 2 | g01090816 |
- Install the water filter and bolts (18) .
Show/hide table
 | |
| Illustration 3 | g01090813 |
- Connect hose assemblies (15) and (16). Install hose clamp (17) .
Show/hide table
 | |
| Illustration 4 | g01090812 |
- Thread hose assemblies (12) through the drum support.
- Install hose clamp (17) .
- Thread hose assemblies (9) through drum support. Install hose clamp (14).
Show/hide table
 | |
| Illustration 5 | g01090811 |
- Connect hose assemblies (12) on propel motor (13) .
Show/hide table
 | |
| Illustration 6 | g01090810 |
- Install the cover and bolts (11) .
- Connect hose assemblies (9) on vibratory motor (10) .
Show/hide table
 | |
| Illustration 7 | g01090807 |
- Install the cover and bolts (8) .
- Connect harness assembly (6) to rear frame (7) .
Show/hide table
 | |
| Illustration 8 | g01090649 |
- Connect harness assembly (5) .
Show/hide table
 | |
| Illustration 9 | g01090648 |
- Connect harness assembly (4). Install nut (3).
Show/hide table
 | |
| Illustration 10 | g01090647 |
- Connect harness assembly (2) .
Show/hide table
 | |
| Illustration 11 | g01090646 |
- Connect harness assembly (1) .
Show/hide table
 | |
| Illustration 12 | g01090645 |
End By: Install the operator platform. Refer to Disassembly and Assembly, "Operator Platform - Remove and Install".
Caterpillar Information System:
834H Wheel Dozer and 836H Landfill Compactor Electrohydraulic System Sensors
416E, 422E and 428E Backhoe Loaders Backhoe Auxiliary Control (Foot Operated) - If Equipped
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Licensing
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems Brake Control Valve (Service)
CB-334E Series II and CB-335E Series II Paving Compactors Seat
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hoist Cylinder
725C, 725C2, 730C, 730C2 and 730C, 730C2 EJECTOR Articulated Truck Systems Hoist Cylinder
725, 730 and 730 EJECTOR Articulated Trucks Machine Systems Hydraulic Tank
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Disassemble
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Install
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Rollover Protective Structure (ROPS) - Remove and Install
416E Backhoe Loader Backhoe Extendable Stick Control (Foot Operated) - If Equipped
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Seat - Remove and Install
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Direction and Speed Control - Remove and Install
CB-214E, CB-224E and CB-225E Vibratory Compactors Machine Systems Direction and Speed Control - Assemble
446D Backhoe Loader Machine Systems Pilot Valve (Backhoe) - Assemble
CB-434D and CB-434D XW Vibratory Compactor Machine Systems Gear Pump (Steering) - Remove
416E Backhoe Loader Joystick Control (Loader)
CB-334E Series II and CB-335E Series II Paving Compactors Engine Starting
CB-334E Series II and CB-335E Series II Paving Compactors Stopping the Machine
CB-334E and CB-335E Paving Compactors Capacities (Refill)
446D Backhoe Loader Machine Systems Pilot Valve (Stabilizer) - Remove
R2900G Load Haul Dump Machine Systems Diverter Valve (Secondary Steering) - Remove
R1300G Load Haul Dump Machine Systems Hydraulic Tank - Assemble