Bank Valve (Seven) (Mechanically Operated)
Show/hide table
 | |
| Illustration 1 | g01789533 |
(2) Control valve group (extendable stick) (3) Control valve group (stick) (4) Control valve group (bucket) (5) Control valve group (swing) (6) Control valve group (boom) (7) Control manifold group (inlet) (8) Control valve group (left side stabilizer) (9) Control valve group (right side stabilizer) | |
(1) Torque for three nuts ... 38 to 42 N·m (28 to 31 lb ft)
(10) Torque for three nuts ... 20 to 24 N·m (15 to 18 lb ft)
Note: Use only three bolts (11) for mounting the bank valve in order to ensure proper functioning of the valves in the bank valve.
(11) Maximum torque for three bolts ... 27 N·m (20 lb ft)
Caterpillar Information System:
C15 and C18 Generator Set Engines Turbocharger Outlet Pressure Sensor - Remove and Install
16H Motor Grader Power Train Final Drive - Disassemble
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic L General Information
248B and 268B Skid Steer Loaders Machine Systems Work Tool Hydraulic System
2004/07/05 A New Top Tank Assembly for the Radiator Has Improved Durability {1377}
16H Motor Grader Power Train Final Drive - Install
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Disassemble
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Remove
10-20B and 8-16B EXTEND A MAT SCREEDS Thickness Control
C15 and C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
PF-300C and PS-300C Pneumatic Compactors Machine System Steering Hydraulic System
2004/04/26 Some Track Roller Frames are No Longer Available {4151}
16H Motor Grader Power Train Final Drive - Assemble
TH580B Telehandler Additional Messages
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Eight) (Mechanically Operated)
770 and 772 Off-Highway Truck Ether Starting Aid Cylinder - Replace
770 and 772 Off-Highway Truck Frame - Clean/Inspect
16H Motor Grader Power Train Transmission Oil Filter Base - Remove
16H Motor Grader Power Train Transmission Oil Filter Base - Install
C15 and C18 Generator Set Engines Inlet Air Temperature Sensor - Remove and Install
8-16B and 10-20B Extend-A-Mat Screed Hydraulic Cylinder (Extender Extend) - Remove and Install
Product Link - PL102C Electronic Control Module (ECM) - Replace