Turbocharger Outlet Pressure Sensor - Remove and Install
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 断开线束组件 (1)。
- 将涡轮增压器输出压力传感器 (2) 从缸盖上拆下。
- 将 O 形密封圈从涡轮增压器输出压力传感器上拆下。
Show/hide table
| |
| 图 1 | g01068209 |
Show/hide table
| 注意 |
|---|
|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 将一个新的 O 形密封圈安装在涡轮增压器输出压力传感器上。
- 将涡轮增压器输出压力传感器 (2) 安装到缸盖中，并拧紧至扭矩为
10 ± 2 N·m (89 ± 18 lb in) 。 - 连接线束组件 (1)。
Show/hide table
|
| |
| 图 2 | g01068209 |
Caterpillar Information System:
16H Motor Grader Power Train Final Drive - Disassemble
924K, 930K, 938K, 950G II, 950H, 950K, 950L, 950M, 950M Z, 962G II, 962H, 962K, 962L, 962M, 962M Z, 966G II, 966H, 966K, 966L, 966M, 966M XE, 972G II, 972H, 972K, 972L, 972M, 972M XE, 980G II, 980H, 980K, 980L, 980M and 982M Wheel Loaders Automatic L General Information
248B and 268B Skid Steer Loaders Machine Systems Work Tool Hydraulic System
2004/07/05 A New Top Tank Assembly for the Radiator Has Improved Durability {1377}
16H Motor Grader Power Train Final Drive - Install
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Six)(Mechanically Operated)
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Disassemble
R2900G Load Haul Dump Power Train Gear Pump (Transmission Charging) - Remove
10-20B and 8-16B EXTEND A MAT SCREEDS Thickness Control
C15 and C18 Generator Set Engines Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Generator Set Engines Atmospheric Pressure Sensor - Remove and Install
8-16B and 10-20B Extend-A-Mat Screed Screed Plate (Extender) - Remove and Install - Fuel Heat
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Seven) (Mechanically Operated)
PF-300C and PS-300C Pneumatic Compactors Machine System Steering Hydraulic System
2004/04/26 Some Track Roller Frames are No Longer Available {4151}
16H Motor Grader Power Train Final Drive - Assemble
TH580B Telehandler Additional Messages
416E, 420E and 430E Backhoe Loaders Hydraulic and Steering System Bank Valve (Eight) (Mechanically Operated)
770 and 772 Off-Highway Truck Ether Starting Aid Cylinder - Replace
770 and 772 Off-Highway Truck Frame - Clean/Inspect
16H Motor Grader Power Train Transmission Oil Filter Base - Remove
16H Motor Grader Power Train Transmission Oil Filter Base - Install
C15 and C18 Generator Set Engines Inlet Air Temperature Sensor - Remove and Install
8-16B and 10-20B Extend-A-Mat Screed Hydraulic Cylinder (Extender Extend) - Remove and Install