Introduction
Illustration 1 | g01061002 |
The CB-214E, CB-224E, and CB-225E are equipped with a water spray system which distributes water to the drums and/or tires to prevent asphalt from sticking during operation. The CB-225E is also equipped with a tire wetting system which distributes emulsion to the tires to prevent asphalt from sticking to the tires.
The section of this presentation that contains the water spray system is divided into segments. The first segment contains a drawing of the layout of the machine. This segment provides a general overview of the water spray system.
The next three segments show the location of all components on the machine which are part of the water spray system. A brief discussion of each component is provided in these segments.
The last section explains the operation of the electrical system. An electrical schematic is used in this segment to trace current through the electrical system.
Components
Illustration 2 | g01063138 |
(1) Switch for water spray and the switch for emulsion spray (if equipped)
(2) Fuses
(3) Relay for the spray system and timer
(4) Motor for the water spray and pump group
(5) Water tank
(6) Emulsion tank (if equipped)
(7) Spray bars