Bucket Linkage and Loader Cylinder Bearings - Lubricate
Tilt Cylinder and Bucket Linkage
- Wipe off the grease fittings before you apply lubricant.
Show/hide table
Illustration 1 g00414607 Show/hide tableIllustration 2 g00414605 - Lubricate the grease fittings for the tilt cylinder (1). Lubricate the grease fittings for the tilt linkage (2).
- Wipe off the grease fittings before you apply lubricant.
Show/hide table
Illustration 3 g02746237 - Apply lubricant to grease fittings (1) for the frame and for the lift arm of the machine. There is a grease fitting for each side of the machine.
- Apply lubricant to grease fittings (2) for the head end of the lift cylinders of the machine. There is a grease fitting for each side of the machine.
Show/hide table
Illustration 4 g00403638 - Apply lubricant to grease fittings (3) for the rod ends of the lift cylinders. There is a grease fitting for each side of the machine.
Attachment Arm and Cylinder Linkage
- Wipe off the grease fittings before you apply lubricant.
Show/hide table
Illustration 5 g00474190 - Apply lubricant to the three grease fittings for the lift arm linkage on the right side of the machine.
Show/hide table
Illustration 6 g00474200 - Apply lubricant to the grease fittings for the tilt linkage on each side of the machine.
Caterpillar Information System:
Bench Test Procedure for Hydraulic Piston Motors{4351, 5058} Bench Test Procedure for Hydraulic Piston Motors{4351, 5058}
3508B Engine for Caterpillar Built Machines Coolant Flow
247B, 257B, 267B, 277B and 287B Multi Terrain Loaders and 216B, 226B, 232B, 236B, 242B, 246B, 248B, 252B, 262B and 268B Skid Steer Loaders Auxiliary Hydraulic Electronic Control System MID 106 - CID 1695 - FMI 04
3508B Engine for Caterpillar Built Machines Automatic Altitude Compensation
M325D L MH and M325D MH Material Handlers Hydraulic System Service Brake Control Valve
3508B Engine for Caterpillar Built Machines Air Filter Restriction
446D Backhoe Loader Axles, Differential and Brakes Drive Shaft
M325D L MH and M325D MH Material Handlers Machine System Boom Cylinder Lines - Material Handler-Right Hand
M325D L MH and M325D MH Material Handlers Machine System Boom Cylinder Lines - Material Handler-Left Hand
CP-533E and CS-533E Vibratory Soil Compactors Stopping the Engine if an Electrical Malfunction Occurs
2004/03/15 Updated Fuel Tank Caps Are Now Available {1273}
CP-533E and CS-533E Vibratory Soil Compactors Parking Brake Manual Release
R2900G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Drift - Check
R2900G Load Haul Dump Hydraulic System Lift and Tilt Cylinder Speed - Check
R1300G Load Haul Dump Power Train Trunnion Support (Oscillating Axle, Front) - Install
R2900G Load Haul Dump Hydraulic System Machine Preparation for Troubleshooting
R2900G Load Haul Dump Hydraulic System Lift Arm Positioner - Adjust
R1300G Load Haul Dump Power Train Transmission Output from Transmission - Separate
R2900G Load Haul Dump Power Train Screen (Torque Converter)
2003/12/22 Updated Fuel Tank Caps are Now Available {1273}
3508B Engine for Caterpillar Built Machines Crankcase Pressure
HF181, HF201 and HF221 Felling Heads Disc Saw Performance - Test and Adjust
3508B Engine for Caterpillar Built Machines Engine Oil Pressure
CP56B, CP68B, CP74B, CS56B, CS68B, CS74B, CS78B and CS79B Vibratory Soil Compactors Tire Shipping Pressure