446D Backhoe Loader Axles, Differential and Brakes Caterpillar

Front

184-1113 Drive Shaft

Illustration 1	g01018491

Note: All threaded holes and all bolted joint surfaces of the axle and the transmission yokes must be clean, dry, and free of oil, grease, and contaminants.

(1) Tighten the eight bolts to the following torque. ... 47 ± 9 N·m (37 ± 7 lb ft)

Note: Do not reuse bolts. Discard bolts after initial torque is applied.

Rear

184-1114 Drive Shaft

Illustration 2	g01018516

Note: Use sequence (A) from Illustration 2 to tighten the four 8T-0799 Bolts.

(1) Tighten the four 8T-0799 Bolts to the following torque. ... 130 ± 20 N·m (96 ± 15 lb ft)

(2) Tighten the four 107-6826 Bolts to the following torque. ... 25 ± 6 N·m (18 ± 4 lb ft)

Note: Do not reuse bolts. Discard bolts after initial torque is applied.