267, 277 and 287 Multi Terrain Loaders Machine Systems Caterpillar

Removal Procedure

Start By:

1. Raise the cab upward. Refer to Disassembly and Assembly Manual, "Cab - Tilt".

Show/hide table



Illustration 1	g00570286

1. Remove nuts (1) .

2. Disconnect harness assembly (2) .

3. Remove grommet (3) .

Show/hide table



Illustration 2	g00576277

4. Disengage cab support (4) and lower the cab.

Show/hide table



Illustration 3	g00590146

5. Remove bolts (5) and remove the access panel.

Show/hide table



Illustration 4	g00590150

6. Remove bolts (6) under the front of the seat.

Show/hide table



Illustration 5	g00567073

7. Use two people to remove seat (7). The weight of seat (7) is approximately 24 kg (53 lb).

Note: For additional information concerning the seat, refer to Service Manual, SENR6615, "Contour Series Seat".

Installation Procedure

Show/hide table



Illustration 6	g00567073

1. Use two people to position seat (7). The weight of seat (7) is approximately 24 kg (53 lb).

Show/hide table



Illustration 7	g00590150

2. Install nuts (6) under the front of the seat.

Show/hide table



Illustration 8	g00590146

3. Position the access panel and install bolts (5) .

Show/hide table



Illustration 9	g00576277

4. Raise the cab and engage cab support (4) .

Show/hide table



Illustration 10	g00570286

5. Install nuts (1) .

6. Install grommet (3) .

7. Connect harness assembly (2) .

End By: Lower the cab. Refer to Disassembly and Assembly Manual, "Cab - Tilt".