Usage:
Start By:
a. remove crankshaft pulley & damper
1. Loosen bolt (1) closest to the engine on each side of the generator.
2. Attach two lifting slings and a suitable lifting device to radiator support (2) as shown. Remove eight bolts, washers and nuts (4) fastening radiator support (2) to engine support (3).
3. Remove radiator support (2). The weight of radiator support (2) is 25 kg (55 lb).
4. Attach chains and a suitable lifting device to the engine lifting brackets as shown. The weight of the engine is approximately 3629 kg (8000 lb).
5. Support the engine with the chains and the suitable lifting device.
6. Remove four bolts, washers and nuts (6).
7. Remove eight bolts (5).
8. Remove engine support (3). The weight of engine support (3) is 25 kg (55 lb).
9. If necessary, place wood blocks under the engine where the front housing and the oil pan are mated to support the engine.
NOTE: To install the engine support, reverse the removal steps.
End By:
a. install crankshaft pulley & damper