| |
| Illustration 1 | g01020309 |
Make sure that all of the messages are legible. Clean the messages or replace the messages if you cannot read the words.
When you clean the messages, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the messages. Loose adhesive will allow the messages to fall.
Replace the illustrations if the illustrations are not legible. Replace any message that is damaged, or missing. If a message is attached to a part that is replaced, install a message on the replacement part.
Consult your Caterpillar dealer for replacement of messages.
Air Conditioner (1)
This message is located on the radiator.
| |
| Illustration 2 | g00983944 |
Reference: For information on the cooling system, refer to Special Publication, SEBU6250, "Caterpillar Machine Lubricant Recommendations".
Your Caterpillar dealer has the trained personnel and the correct tools for this procedure.
Alternate Exit (2)
This message is located on the right cab door.
| |
| Illustration 3 | g01002993 |
Unlock the alternate exit during machine operation.
ROPS (3)
This message is located on the right side of the cab.
| |
| Illustration 4 | g00906117 |
Reference: For information, refer to Operation and Maintenance Manual, "Guards (Operator Protection)".