Brake Proportional Manifold (Traction Control System) - Disassemble
Disassembly Procedure
Start By:
- Remove the proportional brake valve. Refer to Disassembly and Assembly, "Brake Valve (Proportional) (Traction Control System) - Remove".
- Remove the following items from manifold (1) : nuts (2), spacers (3) and coil assemblies (4) .
Show/hide table
Illustration 1 | g00282838 |
Show/hide table
Illustration 2 | g00282839 |
- Remove cartridge assemblies (5) from manifold (1) .
Show/hide table
Illustration 3 | g00282840 |
- Remove O-ring seals (6) from cartridge assemblies (5) .
Show/hide table
Illustration 4 | g00282842 |
- Remove valves (7) from manifold (1) .
Show/hide table
Illustration 5 | g00282843 |
- Remove O-ring seals (8) and the rings from valves (7) .
Show/hide table
Illustration 6 | g00282845 |
- Remove nut (10) and coil assembly (9) from manifold (1) .
Show/hide table
Illustration 7 | g00282846 |
- Remove cartridge assembly (11) from manifold (1) .
Show/hide table
Illustration 8 | g00282848 |
- Remove O-ring seals (12) and the rings from cartridge assembly (11) .
Show/hide table
Illustration 9 | g00282850 |
- Remove plugs (13), plug (14), and fitting (15) from manifold (1) .
Show/hide table
Illustration 10 | g00282851 |
Caterpillar Information System:
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Remove
C7 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Control Valve (Service) - Remove and Install
120H and 135H Motor Graders Engine Power Loss
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Metering Pump (HMU) - Remove
120H and 135H Motor Graders Engine Overheating
R2900G Load Haul Dump Machine Electrical System Engine Start
TH62, TH63, TH82 and TH83 Telehandlers Lifting Capacities
CB-434D Paving Compactor Steering Frame Lock
CB-434D Paving Compactor Towing the Machine
CB-434D Paving Compactor Parking Brake Manual Release
938G Series II Wheel Loader and IT38G Series II Integrated Toolcarrier Machine Systems Brake Proportional Manifold (Traction Control System) - Assemble
TH350B, TH355B, TH360B, TH460B and TH560B Telehandlers Power Train Transmission - Install
267, 277 and 287 Multi Terrain Loaders Machine Systems Bogie Wheel
AP-655C and BG-2255C Asphalt Pavers Operation Information
797 Off-Highway Truck Braking System Oil Cooler (Rear Brake)
797 Off-Highway Truck Braking System Oil Cooler (Brake, Hydraulic Fan, Steering)
Supplemental Documentation for the Payload Control System{7494} Supplemental Documentation for the Payload Control System{7494}
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
AP-655C Asphalt Paver Roading the Machine
AP-655C Asphalt Paver Access Doors and Covers
C7 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
Rework Procedure for the Tube Assembly of the Yoke{7050, 7051} Rework Procedure for the Tube Assembly of the Yoke{7050, 7051}