Pump Drive - Install
Show/hide table
Tool | Part Number | Part Description | Qty |
A | 138-7573 | Link Bracket | 1 |
- Install Tooling (A) and a suitable lifting device. Position pump drive (3) in the machine. The weight of pump drive (3) is approximately
150 kg (330 lb) . - Install bolts (2).
- Remove Tooling (A).
Show/hide table
Illustration 2 g00975391 - Connect wire assembly (1).
Show/hide table
Illustration 1 | g00975392 |
End By:
- Install the hand pump. Refer to Disassembly and Assembly, "Hand Pump (Hydraulic Oil Fill) - Remove and Install".
- Install the propel pump. Refer to Disassembly and Assembly, "Piston Pump (Propel) - Install".
- Install the implement pump. Refer to Disassembly and Assembly, "Piston Pump (Implement, Pilot, Steering) - Install".
- Install the saw pump. Refer to Disassembly and Assembly, "Piston Pump (Saw) - Install".
Caterpillar Information System:
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Electronic Control Module (ECM) - Replace
533 and 543 Wheel Feller Bunchers Power Train Pump Drive - Remove
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Throttle Position Sensor
CB-534D, CB-534D XW and CB-564D Vibratory Asphalt Compactors Propel System Location of Hydraulic Components
CB-534D, CB-534D XW and CB-564D Paving Compactors Machine Systems Location of Hydraulic Components (Steering System)
2002/11/18 New Transmission Oil Filter Hoses Are Available {3154}
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Final Drive Planetary (Axle) Oil Level - Check
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Final Drive Planetary (Axle) Oil Sample - Obtain
533 and 543 Wheel Feller Bunchers Power Train Flexible Coupling - Remove and Install
CS-563E, CP-563E, CS-573E, CP-573E, CS-583E, CP-583E, CS-663E, CP-663E and CS-683E Vibratory Soil Compactors Final Drive Planetary (Axle) Oil - Change
Test Sequence for Pencil Type Fuel Nozzles{1254} Test Sequence for Pencil Type Fuel Nozzles{1254}
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Throttle Switch
14H Motor Grader Machine Systems Combination Valve - Install
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Electronic Control Module (ECM) - Flash Program
69D, 73D, 769C, 769D, 773B, 773D, 773E, 776B, 776C, 776D, 777B, 777C, 777D, 784B, 785, 785B, 789 and 793 Off-Highway Truck/Tractors and 771D, 775B, 775D and 775E Quarry Trucks Payload System Glossary of Terms
R1300G Load Haul Dump 3306 Engine Supplement Flywheel Housing
R1300G Load Haul Dump 3306 Engine Supplement Flywheel
TH210 and TH215 Telehandlers Machine Systems Brake Accumulator - Remove and Install
TH210 and TH215 Telehandlers Machine Systems Accumulator Charging Valve (Brake) - Remove
3512 and 3516 EUI Engines for 784B, 785B, 789B and 793B Off-Highway Trucks Engine Fan Speed Sensor
IT28G Integrated Toolcarrier and 924G, 924GZ and 928G Wheel Loaders MID 081 - CID 0590 - FMI 09
14H Motor Grader Machine Systems Centershift Lock Bar and Front Frame Bushings - Install
2002/11/11 Correction to Systems Operation, Testing and Adjusting Module , "Main Relief Valve Test" {4095}
574B Forwarder Power Train Bogie