Solenoid Valve Group Now Available For Load Valve Group {5472}
Usage:
IT12 (2YC, 4NC) Integrated Tool Carriers
Description of Change: The 8T-9869 Solenoid Valve Group is now available for the 9T-4741 Load Valve Group, which is part of the 5G-6579 Check Valve Lines Group.
Adaptable To: The 8T-9869 Solenoid Valve Group is adaptable to IT12 (2YC, 4NC) Integrated Toolcarriers that contain the 9T-4741 Load Valve Group.
The right side view of the 8T-9869 Solenoid Valve Group (1) within the 5G-6579 Check Valve Lines Group.
View A-A
The 8T-9869 Solenoid Valve Group (1), 9T-4741 Load Valve Group (2).
Caterpillar Information System:
1996/01/29 Shims Or Plates Now Used In Front Suspension Groups To Increase Upper Suspension Cylinder Bearing Life {7201}
1996/01/29 Wheel Bearing Adjustment Intervals {4208,4201}
1996/01/29 Lubrication Slots Machined In The End Housing Assembly Of The Planetary Group Provides More Lubrication To The Contact Surface Between The End Housing Assembly And The Ring Gear {3150}
1996/01/29 New Oil Level Gauge Used {1326}
1996/01/22 New Water Temperature Regulator Available{1355}
1996/01/22 Governor Spring Guide Press Depth{1287,1284}
1996/01/22 Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22 New Valve Cover Gasket{1107}
1996/01/22 Fuel System Component Information{1254}
1996/01/22 Mixing Caterpillar Long Life Coolant/Antifreeze (LLCA) With Conventional Cat Diesel Engine Antifreeze/Coolant And/Or Other Commercially Available Diesel Engine Antifreeze/Coolants Is Not Recommended{1395}
1996/01/22 Proper Operation Of 24 Volt Radios{7338}
1996/01/22 Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/29 New Hose Assemblies Used In Turbocharger Oil Lines Groups {1307}
1996/02/05 New Stronger Drawbar Reduces Deformation In Severe Loading Situations{7105,7119}
1996/02/05 New Duo-Cone Seal Retainer And Backing Plate Reduces Oil Leaks In The Service And Parking Brake Group{4251,7561}
1996/02/05 Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05 Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/12 Replaceable Drawbar Wearplate Eliminates Wear On Support Assembly{7105,7119}
1996/02/12 New Pressure Switch Assembly Is Available For Fuel Applications; 9G-8011 Pressure Switch Assembly Should Not Be Used In Fuel Applications {7414}
1996/02/12 New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12 Closed Engine Crankcase Breather System Maintenance And Repair {1317,1107}
1996/02/19 Use Of BIO HYDO Oils in Off-Highway Trucks{3022}
1996/02/19 New Bolts And Washers Used In Rear Axle Spindle To Rear Axle Joint Provides Additional Strength To Prevent Bolt Breakage{3260}
1996/02/19 New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}