Use 6V3044 Polishing Belt For Crankshaft Reconditioning{0622,1202}
Usage:
All Crankshafts For All Engines
The 6V3044 Polishing Belt is available for use in a high speed polisher to put an acceptable surface finish on the crankshaft journals. A good surface finish is necessary for maximum bearing service life. These belts, used according to "Guidelines For Reusable Parts-Procedure To Polish Crankshafts," Form No. SEBF8042, will give a good surface finish that will keep journal profile (shape) changes to a minimum.
There are ten belts, which are 25.4 mm x 1651 mm (1" x 65"), sent when the part number is ordered.
Caterpillar Information System:
1980/04/28 Boring Machine, Adapter Groups And Sleeves Available For Repair Of Damaged Cylinder Blocks{0622,1201,1216}
1980/04/28 New 1N3270 Auxiliary Drive Group Available As Attachment{1165}
1980/04/21 Crankcase Capacity Increased And New Oil Level Gauges Used; Specifications For Conversion Of Existing Gauges{1318,1302}
1980/04/21 New Filter Elements Are Available For "Fire Resistant Fluid" Hydraulic Systems{5068}
1980/04/21 Main And Connecting Rod Bearings With Cavitation Erosion Can Be Used Again{1230,1203,1219}
1980/04/14 6V2040 Ratchet Adapter Available For Use With Torque Multipliers On Hydraulic Cylinder Repair Stands{0614,0622}
1980/04/14 Wrong Installation Of Oil Cooler Gasket Can Cause High Oil Temperatures{1378,1306}
1980/04/14 Dowtherm 209 Full-Fill Coolant{1350}
1980/04/14 Important: Use Only 12 Volts Direct Current To Boost Start 3208 Truck Engines Equipped With Exhaust Gas Recirculation Systems{1401,1453,1080}
1980/04/14 Repair Parts Now Available For 5S2801 Hose Press Group{0624}
1980/03/31 New Liner Seat Insert For No. 1 And No. 4 Cylinders Of D353 Engines{1217}
1980/03/31 Modification Of 5P1768 Pointer Assembly Necessary For Use On Some Fuel Injection Pump Housings{1253,0653}
1980/05/05 New 6V2120 Spline Sprocket Improves Depth Control Of 5P4175 Boring Tool Group{0663}
1980/05/05 Changes To 9S240 Rack Position Tool Group; Revision To Special Instructions{0653,0374,1250}
1980/05/05 Improvements Made To Water Separator Groups{1263}
1980/05/05 Hardened Washers Now Used On Bolts For Fan Shroud{1353,1360}
1980/05/12 Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12 Improvements To Engine Oil Lines Group Makes Installation Easier; Prevents Reverse Connections{1307,1318,1155}
1980/05/12 "I checked everything but..."{0100}
1980/05/12 Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube{1201,1316}
1980/05/12 New Part Available To Check The 3S1467 Plunger And Barrel Assemblies{1251,1252,0652}
1980/05/12 Possible Cause Of A Low Idle Misfire And/Or Backfire{1278,1076,1250}
1980/05/12 Bushing Bores In Boom Can Be Machined In The Field{6501,0664}
1980/05/12 Changes To Oil Level Gauge Group Improve Accuracy Of Oil Level Indications, Increase Oil Capacity Of 245 Excavators And Front Shovels{1300}