Starting Motors
Usage:
Remove Starting Motors
1. Disconnect ground wire (1) from starter.
2. Disconnect solenoid switch wire (2).
3. Disconnect cable (4) from solenoid.
4. Tag all wires for identification when installing.
5. Attach a hoist to the starter. Remove the three mounting bolts (3). Remove the starter-weight 80 lbs. (36 kg).
Install Starting Motors
1. Attach hoist, and position the starter on the engine. Install the three mounting bolts.
2. Remove the identification tags from wiring. Connect the solenoid switch wire.
3. Connect the cable to the starter solenoid.
4. Connect the ground wire to starter.
Caterpillar Information System:
D349 INDUSTRIAL & MARINE ENGINES Sea Water Pump
D349 INDUSTRIAL & MARINE ENGINES Water Pump
D349 INDUSTRIAL & MARINE ENGINES Cylinder Liners
D349 INDUSTRIAL & MARINE ENGINES Pistons
D349 INDUSTRIAL & MARINE ENGINES Spacer Plates
D349 INDUSTRIAL & MARINE ENGINES Left Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Rear Or Left Rear Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Right Rear Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Right Front Or Left Front Cylinder Head Assembly (Alternate Method)
D349 INDUSTRIAL & MARINE ENGINES Right Front Cylinder Head Assembly
D349 INDUSTRIAL & MARINE ENGINES Left Rear Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Left Front Camshaft Housing
D349 INDUSTRIAL & MARINE ENGINES Flywheel
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal Ring And Thrower
D349 INDUSTRIAL & MARINE ENGINES Crankshaft Rear Seal
D349 INDUSTRIAL & MARINE ENGINES Flywheel Housing
D349 INDUSTRIAL & MARINE ENGINES Rear Timing Gears & Plate
D349 INDUSTRIAL & MARINE ENGINES Crankshaft
D349 INDUSTRIAL & MARINE ENGINES Crankshaft
6.25" BORE ENGINE ATTACHMENTS Systems Operation
6.25" BORE ENGINE ATTACHMENTS Testing And Adjusting
6.25" BORE ENGINE ATTACHMENTS 2N6006 Governor Air Actuator
6.25" BORE ENGINE ATTACHMENTS 1N9318 & 7L135 Governor Air Actuators
6.25" BORE ENGINE ATTACHMENTS 2N6961 Clutch Assembly