DEF Tank Temperature Is High
Use this procedure to troubleshoot a high Diesel Exhaust Fluid (DEF) tank temperature. Also, use this procedure if the following event code is active or logged.
Show/hide table
| J1939 Code and Description | CDL Code and Description | Comments |
|---|---|---|
| 4368-15
Aftertreatment #1 DEF Tank Temperature : High - least severe (1) |
E961 (1)
High Aftertreatment #1 DEF Tank #2 Temperature |
The Diesel Exhaust Fluid (DEF) Tank Temperature is High. |
Show/hide table
| Associated Codes | ||
|---|---|---|
| J1939 Code | CDL Code | Troubleshooting Procedure |
| 4368-3 | 3135-3 | Troubleshooting, "DEF Tank Sensor - Test" |
| 4368-4 | 3135-4 | Troubleshooting, "DEF Tank Sensor - Test" |
- Codes
- Sensor
Show/hide table
| Troubleshooting Test Steps | Values | Results |
|---|---|---|
1. Check for Codes A. Turn the breaker to the ON position. B. Connect Cat® Electronic Technician (ET) to the service tool connector. C. Look for active codes that are associated with the system for the event code. |
Codes |
Result: An associated code is active. Repair: Troubleshoot any associated codes before continuing with this test. Result: A code is active or logged. Proceed to Test Step 2. |
2. Check the DEF Tank #2 Temperature Sensor A. Turn the breaker to the ON position. B. Connect Cat ET. C. Use Cat ET to monitor the following temperature: - "Cabinet Temperature" - "DEF Tank #2 Temperature" |
Sensor |
Result: The "DEF Tank #2 Temperature" is within Return to service. Result: The "DEF Tank #2 Temperature" is greater than Repair: Replace the DEF header assembly. Verify that the repair eliminated the problem. |
If the procedure did not correct the issue, contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).
Caterpillar Information System:
Selective Catalytic Reduction Retrofit Aftertreatment DEF Tank Level Is Low
Selective Catalytic Reduction Retrofit Aftertreatment DEF Tank Level Is High
Selective Catalytic Reduction Retrofit Aftertreatment DEF Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment DEF Pressure Is High
Selective Catalytic Reduction Retrofit Aftertreatment DEF Does Not Purge
Selective Catalytic Reduction Retrofit Aftertreatment Clean Emissions Module Has High Oxygen Level
Selective Catalytic Reduction Retrofit Aftertreatment Air Assist Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment Air Assist Pressure Is High
C175 Tier 4 Final Engines for Off-Highway Trucks DEF Controller Resistor - Test
793F Off-Highway Truck Exhaust Outlet Nitrogen Oxide Sensor - Replace
793F Off-Highway Truck Exhaust Inlet Nitrogen Oxide Sensor - Replace
390F Excavator Product Identification Number
Selective Catalytic Reduction Retrofit Aftertreatment DEF Tank Temperature Is Low
Selective Catalytic Reduction Retrofit Aftertreatment NOx Conversion Is Low
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Inlet Pressure Is High
Selective Catalytic Reduction Retrofit Aftertreatment SCR Catalyst Inlet Pressure Is Low
Selective Catalytic Reduction Retrofit Aftertreatment Data Link - Test
Selective Catalytic Reduction Retrofit Aftertreatment DEF Pump Motor - Test
Selective Catalytic Reduction Retrofit Aftertreatment Sensor Signal (Analog, Active) - Test
Selective Catalytic Reduction Retrofit Aftertreatment System Overview
Selective Catalytic Reduction Retrofit Aftertreatment Diagnostic Trouble Codes
C4.4 Generator Sets Air Inlet and Exhaust System
C4.4 Generator Sets Turbocharger - Inspect
New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125} New Cylinder Head Gasket on Certain C3.4 Engines {1100, 1103, 1104, 1105, 1108, 1109, 1115, 1117, 1121, 1124, 1125}