Service Tools
Standard Caterpillar ® tools should be adequate for service. The following tools are needed to troubleshoot the Machine Security System:
Show/hide table
Service Tools | |
---|---|
Part Number | Description |
9U-7246 | Connector Repair Kit |
7X-1710 | Multimeter Probe |
8T-5318 | Wire Removal Tool |
6V-7070 | Digital Multimeter |
4C-4911 | Battery Load Tester |
In addition to the tools listed in Table 1, a laptop computer with the Cat® Electronic Technician (Cat ET) and the communication adapter are required.
The Cat ET 2015B or later is required to use the full security management potential of the Machine Security System.
Caterpillar Information System:
MSS3s Machine Security System General Information
MSS3s Machine Security System System Components
MSS3s Machine Security System Electronic Control Module (ECM)
MSS3s Machine Security System Service Operation Using Service Tool
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Remove
MSS3s Machine Security System Service Operation Using Machine Security System
MSS3s Machine Security System Protected Functions
MSS3s Machine Security System Events
MSS3s Machine Security System Diagnostic Operation
MSS3s Machine Security System Scheduled Access - "Security System Bypass Times"
MSS3s Machine Security System Key Information
MSS3s Machine Security System Operation of Status Indicator
MSS3s Machine Security System Symptom Troubleshooting
MSS3s Machine Security System Emerging Symptom Information
MSS3s Machine Security System Lost Key (MSS)
2015/07/28 A New Bracket is Now Used on The Door Latch Assembly of Certain M, M Series 2, and M Series 3 Motor Graders {7308}
MSS3s Machine Security System Engine Does Not Crank and Status Indicator Is Green
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Bucket Cylinder
A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920} A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920}
2015/07/27 Improved Check Valves Are Now Used On Certain Motor Graders {5051}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Drive Shaft - Remove and Install
MD6200 Rotary Drill Mast Operation
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}