A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920} Caterpillar


A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920}

Usage:

795F AC ERM
Off-Highway Truck/Tractor
793F (S/N: SND1-UP; SSP1-UP; RBT1-UP)
794 AC (S/N: MN51-UP; MT51-UP)
795F AC (S/N: ERM1-UP)
795FAC XQ (S/N: SNT1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
Service Magazine, SEPD2052, 11, September 2015, "A New Fuel Injector Is Now Available for Certain 793F, 795F, and 797F Off-Highway Truck Engines". Disregard this article, the machine effectivity and software part numbers have been updated. Refer to the article that follows.

Description Of Change: The new fuel injector has an improved valve and armature design that increases the robustness of the fuel injector for increased life.

Adaptable To: The new 443-9454 Fuel Injector replaces the existing 331-5895 Fuel Injector for 793F and 797F. The new 443-9454 Fuel Injector also replaces the 331-5894 Fuel Injector for the 795F. The Reman 20R-5566 Fuel Injector replaces the existing 10R-8998 Fuel Injector and 10R-9004 Fuel Injector Gp. The new fuel injector is adaptable back to first production on the serial numbers listed above.

New engine software is required to support the new fuel injector. Engines must be equipped with the following engine software or newer software as shown in Table 1. An interlock code mismatch will be displayed in Cat ET if a new injector and trim file are installed with a previous version of engine software.

Note: The new fuel injectors are interchangeable with the previous fuel injectors. It is NOT required to change an entire set on a given engine. An engine can run with a mixed set of new and old injector part numbers as long as the engine software has been updated.

Table 1
Sales Model  Engine Software 
793F Low Altitude  485-8816 Engine Software 
793F High Altitude  485-8817 Engine Software 
793F Lesser Regulated Countries (LRC)  485-8821 Engine Software 
795F Low Altitude  485-8814 Engine Software 
795F (LRC)  485-8820 Engine Software 
797F Low Altitude  485-8815 Engine Software 
797F High Altitude  485-8818 Engine Software 
797F (LRC)  485-8819 Engine Software 
794 AC  485-8822 Engine Software 
797 North American Retrofit  485-8823 Engine Software 
797 Export Retrofit  485-8824 Engine Software 
793F AC  485-8825 Engine Software 
This change is effective for the engine serial numbers listed in Table 2.

Table 2
Effective Serial Numbers 
S/N:B7B02039-UP 
S/N:JTL01157-UP 
S/N:THR00115-UP 
S/N:LLM01467-UP 
S/N:A4K01027-UP 

Caterpillar Information System:

M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Bucket Cylinder
MSS3s Machine Security System Engine Does Not Crank and Status Indicator Is Green
2015/07/28 A New Bracket is Now Used on The Door Latch Assembly of Certain M, M Series 2, and M Series 3 Motor Graders {7308}
MSS3s Machine Security System Lost Key (MSS)
MSS3s Machine Security System Emerging Symptom Information
MSS3s Machine Security System Symptom Troubleshooting
MSS3s Machine Security System Service Tools
MSS3s Machine Security System General Information
MSS3s Machine Security System System Components
MSS3s Machine Security System Electronic Control Module (ECM)
MSS3s Machine Security System Service Operation Using Service Tool
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Remove
2015/07/27 Improved Check Valves Are Now Used On Certain Motor Graders {5051}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Drive Shaft - Remove and Install
MD6200 Rotary Drill Mast Operation
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {1050, 108D, 1210, 1251, 1254, 1290, 1405, 1713}
R2900G Load Haul Dump Cab Air Filter - Clean/Replace - If Equipped
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Air Conditioner Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Auxiliary Hydraulic Lines
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.