MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Caterpillar


Air Conditioner Lines

Usage:

MH3026 FB9


Illustration 1g03773274

Table 1
Specification for 395-4136 Air Conditioner Lines Gp 
Item  Qty  Part  Specification Description 
136-1613 Bolt  Torque to 10 ± 2 N·m (89 ± 18 lb in)


Illustration 2g03773276

Table 2
Item  Qty  Part  Specification Description 
6V-7357 Bolt  Torque to 5.5 ± 1.5 N·m (48.7 ± 13.3 lb in)
178-3336 Hex Flange Nut  Torque to 21 ± 3 N·m (186 ± 27 lb in)
395-4138 Hose As  Torque to 45 ± 2 N·m (33 ± 1 lb ft)
440-2348 Hose As  Torque to 18 ± 2 N·m (159 ± 18 lb in)

Caterpillar Information System:

MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
R2900G Load Haul Dump Cab Air Filter - Clean/Replace - If Equipped
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {1050, 108D, 1210, 1251, 1254, 1290, 1405, 1713}
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
MD6200 Rotary Drill Mast Operation
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Drive Shaft - Remove and Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Install
2015/07/27 Improved Check Valves Are Now Used On Certain Motor Graders {5051}
A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920} A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920}
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Bucket Cylinder
MSS3s Machine Security System Engine Does Not Crank and Status Indicator Is Green
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Auxiliary Hydraulic Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Auxiliary Hydraulic Lines
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Auxiliary Hydraulic Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Cab Air Duct
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Auxiliary Hydraulic Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Cab Riser Lines
M316D, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Machine System Specifications Stick Cylinder
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Cab Tilt Cylinder
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Auxiliary Valve and Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Boom - 6.8 m (22.31 ft) Material Handler
M318F, M320F and M322F Wheeled Excavators Machine System Specifications Cab Trim
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.