Bucket Cylinder
Show/hide table
Illustration 1 | g03861071 |
Show/hide table
Specification for 368-3242 Bucket Cylinder Gp | |||
---|---|---|---|
Item | Qty | Part | Specification Description |
1 | 1 | 7Y-5131 Bushing | Bore before assembly is Installation depth is |
A | 1 | 368-3266 Hydraulic Cylinder | Bore is |
B | 1 | 368-6815 Cylinder Rod and Bearing As | Diameter is |
2 | 8 | 7Y-5216 Bolt | Torque to |
C | 1 | 374-9042 Head | Bore is |
3 | 1 | 240-2914 Bushing | Bore before assembly is Installation depth is |
4 | 1 | 114-0756 Bushing | Outside diameter before assembly is Thickness is |
5 | 1 | 170-9844 Buffer Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
6 | 1 | 170-9860 U-Cup Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
7 | 1 | 165-9286 Lip Type Seal | Lubricate the sealing lip lightly with the lubricant that is being sealed. |
8 | - | - | Before assembly, apply white Loctite 648 to the wiper seal groove. |
9 | 1 | 147-5835 Special Locknut | Before assembly, lubricate the face and the threads with 8T-9579 Oil.
Torque to |
10 | 1 | 9X-3592 Seal As | Lubricate the inside diameter and the outside diameter with clean grease. |
11 | 1 | 158-9063 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
12 | 1 | 179-9674 Ring | Lubricate the inside diameter and the outside diameter with clean grease. |
Caterpillar Information System:
MSS3s Machine Security System Engine Does Not Crank and Status Indicator Is Green
2015/07/28 A New Bracket is Now Used on The Door Latch Assembly of Certain M, M Series 2, and M Series 3 Motor Graders {7308}
MSS3s Machine Security System Lost Key (MSS)
MSS3s Machine Security System Emerging Symptom Information
MSS3s Machine Security System Symptom Troubleshooting
MSS3s Machine Security System Service Tools
MSS3s Machine Security System General Information
MSS3s Machine Security System System Components
MSS3s Machine Security System Electronic Control Module (ECM)
MSS3s Machine Security System Service Operation Using Service Tool
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Remove
MSS3s Machine Security System Service Operation Using Machine Security System
A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920} A New Fuel Injector Is Now Available for Certain 793F, 795F, 797F, 797 Retrofit, and 794 AC Off-Highway Truck Engines {1254, 1290, 1713, 1920}
2015/07/27 Improved Check Valves Are Now Used On Certain Motor Graders {5051}
740 GC, 740 Ejector, 745 Articulated Truck Power Train Hitch Drive Shaft Bearings - Install
740 GC, 740 Ejector, 745 Articulated Truck Power Train Center Drive Shaft - Remove and Install
MD6200 Rotary Drill Mast Operation
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {108F, 1091, 1251, 1254, 1290, 1713}
2015/07/10 Cat® Reman Announces Additions to Several Engine Component Portfolios {1050, 108D, 1210, 1251, 1254, 1290, 1405, 1713}
R2900G Load Haul Dump Cab Air Filter - Clean/Replace - If Equipped
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Air Conditioner Lines
MH3022, MH3024 and MH3026 Material Handlers Machine System Specifications Stick Cylinder Lines