Radiator - Clean
Show/hide table
 | |
| Illustration 1 | g03432400 |
- Open the access door for the radiator.
- Inspect the radiator cores for debris. If necessary, clean the radiator. Be careful not to damage the fins of the radiator.
Note: Compressed air is preferred, but high-pressure water or steam can be used to remove dust, and general debris from a radiator. Clean the radiator according to the condition of the radiator.
- Close the access door for the radiator.
See Special Publication, SEBD0518, "Know Your Cooling System" for more detailed information about cleaning radiator fins.
Caterpillar Information System:
990K Wheel Loader and 844K Wheel Dozer Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Sample - Obtain
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Level - Check
PM-200 Cold Planer Power Take-Off Clutch Oil Filter - Replace
PM-200 Cold Planer Power Take-Off Clutch Oil Breather - Clean
PM-200 Cold Planer Power Take-Off Clutch Oil - Change
PM-200 Cold Planer Hydraulic System Return Filter - Replace
PM-200 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM-200 Cold Planer Lower Conveyor Belt (First Stage) Tension and Tracking - Adjust
PM-200 Cold Planer Legs (Struts) - Lubricate
Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225} Procedure to Install Gussets on the Front Axle Assembly on Certain 16M Motor Graders{0679, 4313, 5225}
PM310, PM312, and PM313 Cold Planer Rotor Coolant Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive Belt - Inspect
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
PM-200 Cold Planer Rotor Drive Brakes - Inspect/Adjust
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
PM-200 Cold Planer Rotor Drive (Planetary) - Inspect
PM-200 Cold Planer Rotor Drive (Planetary) Oil - Change
PM-200 Cold Planer Rotor Drive (Planetary) Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
PM-200 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-200 Cold Planer Rotor Service Door Pivot Pins - Lubricate
PM-200 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust