Rotor Drive Belt - Inspect
Show/hide table
插圖 1 | g03438336 |
- 打開轉子驅動帶的左側轉子皮帶檢修門 (1),然後裝上桿子將門鎖定在打開位置。
- 檢查轉子皮帶 (2) 是否有斷裂。 檢查皮帶是否有燒灼點。 檢查轉子皮帶是否與繫帶分離和過度磨損。 檢查繫帶是否有磨損、孔洞或起泡。
- 在皮帶護板底部尋找是否有皮帶的殘留物。 如果皮帶出現打滑或過度磨損的跡象,請更換皮帶。
- 如果更換轉子驅動帶,則必須檢查轉子驅動系統煞車。
Caterpillar Information System:
PM310, PM312, and PM313 Cold Planer Rotor Coolant Level - Check
PM-200 Cold Planer Radiator - Clean
990K Wheel Loader and 844K Wheel Dozer Machine Systems Electrohydraulic Control (Joystick) - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Sample - Obtain
3500 and 3500B High Displacement Engines for Caterpillar Built Machines Vibration Damper - Remove and Install
PM-200 Cold Planer Power Take-Off Clutch Oil Level - Check
PM-200 Cold Planer Power Take-Off Clutch Oil Filter - Replace
PM-200 Cold Planer Power Take-Off Clutch Oil Breather - Clean
PM-200 Cold Planer Power Take-Off Clutch Oil - Change
PM-200 Cold Planer Hydraulic System Return Filter - Replace
PM-200 Cold Planer Lower Conveyor Deflectors (First Stage) - Inspect/Replace
PM-200 Cold Planer Lower Conveyor Belt (First Stage) Tension and Tracking - Adjust
2013/12/23 New Exhaust Shield Assemblies Are Used on Certain 3408 and 3412 Engines {1107}
PM-200 Cold Planer Rotor Drive Brakes - Inspect/Adjust
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709} 131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
PM-200 Cold Planer Rotor Drive (Planetary) - Inspect
PM-200 Cold Planer Rotor Drive (Planetary) Oil - Change
PM-200 Cold Planer Rotor Drive (Planetary) Oil Level - Check
PM820, PM822, and PM825 Cold Planer Rotor Drive (Planetary) Oil Sample - Obtain
PM-200 Cold Planer Rotor Service Door Cylinder Pins - Lubricate
PM-200 Cold Planer Rotor Service Door Pivot Pins - Lubricate
PM-200 Cold Planer Upper Conveyor Belt (Second Stage) Tension and Tracking - Adjust
2013/10/02 Improvements for Products and Systems Connected to Product Link {7606}
988K XE Wheel Loader Machine Systems Hydraulic Tank - Disassemble