3516B Generator Set with Dynamic Gas Blending Caterpillar


Turbocharger

Usage:

3516B F4H


Illustration 1g06265789

Table 1
Item  Qty  Part  Specification description 
6L-3005 Band Clamp  Use the following procedure to tighten the band clamp.
1. Tighten the band clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in).
2. Gently hit around the band clamp with a soft hammer.
3. Again, tighten the band clamp to 9.5 ± 1.0 N·m (84.1 ± 8.9 lb in)
16  2N-2765 High Temperature Bolt  Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
Torque to 55 ± 10 N·m (41 ± 7 lb ft)
7W-2297 Clamp As  Use the following procedure to tighten the clamp assemblies.
Before assembly, lubricate the threads with Loctite C5A Copper Anti-Seize.
1. Tighten the clamp assemblies to 13.2 ± 1.5 N.m (116.8 ± 13.3 lb in).
2. Gently hit around the clamp assemblies with a soft hammer.
3. Again, tighten the clamp assemblies to 13.2 ± 1.5 N.m (116.8 ± 13.3 lb in)
9N-2038 Turbine Clamp As 

Caterpillar Information System:

C32 Marine Engine Acceleration Is Poor or Throttle Response Is Poor
C32 Marine Engines General Information
G3300 Engines Alternator and Fan Belts - Inspect/Adjust/Replace
G3300 Engines Maintenance Interval Schedule - Standby
G3300 Engines Maintenance Interval Schedule - Turbocharged Aftercooled
G3300 Engines Maintenance Interval Schedule - Naturally Aspirated
2012/08/03 A New Redundant ECM Cross-Over Harness Is Used for C175-16 Petroleum Engines {1408, 4460, 7426}
2012/09/11 Additional Requirements Are Required for Emission Compliance on Replacement Engines {1000, 775E}
2012/08/21 Improved Aftercooler Lines Components are Available for Certain C280 and 3600 Engines {1063}
336F MHPU Mobile Hydraulic Power Unit Condenser (Refrigerant) - Clean
C9.3 Tier 4 Final Engines Fuel System Pressure - Test
CX48-P2300 Petroleum Transmission Power Train Electronic Control System System Schematic
Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251} Inspection of Fuel Injection Pumps on 3054C, C3.3, C4.4 (Mech), and C7.1 (Mech) Engines {1251}
3500C Marine Engines Fuel Filter
3500B and 3500C Marine Engines Fuel Injector
3512B and 3512C Petroleum Generator Set Engines Exhaust Manifold
3512B and 3512C Petroleum Generator Set Engines Turbocharger
3500B and 3500C Marine Engines Exhaust Manifold
3524B and C175 Engines for Off-Highway Truck/Tractors Cylinder Head
3500B High Displacement Locomotive Engines Fuel Injector
3516C Generator Set Engines Engine Oil Lines
3500B Generator Set Engines Turbocharger
2012/10/11 A Summary of Updates for Type 2 C175-16 Engines {1000}
CX48-P2300 Petroleum Transmission Power Train Electronic Control System General Information
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.