Displays
The IC Monitoring System Display consist of one standard Instrument Cluster on the panel left side, and one optional Cab Display on the right side.
Instrument Cluster
Illustration 1 | g02849129 |
The Instrument Cluster, located on the panel left side. (3) Fuel Level Gauge (4) Service Hour Meter (7) Indicators |
The Instrument Cluster contains the following:
(3) The fuel level gauge display.
(4) The service hour meter digital window display.
(7) The 18 indicators that inform the operator of system problems and system status conditions:
- D P F Regeneration
- Work Tool Level Control
- Alert Indicator Action Lamp
- Alternator/Battery
- Parking Brake
- Operator Present
- High Flow
- Continuous Flow
- Work Tool System
- Hydraulic Status
- Air Inlet Heater
- Engine Condition
- Machine Security System
- Two-Speed Control
- Creep Control
- Ride Control
- Cat Joystick Control Pattern 1
- Alternate Joystick Control Pattern 2
Note: For the details of the indicators, see the following publications:
- This Systems Operation, "Output Components"
- The machine Operation and Maintenance Manual
Cab Display
Illustration 2 | g01331249 |
The Cab Display that is located on the right side panel (5) Coolant Temperature Gauge (6) Hydraulic Oil Temperature Gauge (8) Digital Display Window |
The Cab Display contains the following:
(5) This gauge displays the temperature of the engine coolant.
(6) This gauge displays the temperature of the hydraulic oil that is in the hydraulic tank.
(8) This Digital Data window displays the following:
- Job Clock
- Diagnostics (CID-FMI)
- Machine Parameters
- Component Status
- Units
- Engine RPM
- System Voltage
- Digital Data Display Selection
See this System Operation, "Output Components" for details.