Illustration 1 | g01263100 |
Block Diagram Of The Instrument Cluster Monitoring System |
The IC monitoring system monitors the operation of the machine.
The IC monitoring system provides the operator with the following information:
- Operating Characteristics of the Machine
- Diagnostics
- Warning Events
- Modes of Operation
The IC monitoring system provides the following features:
- Self Test
- Viewing Diagnostic Codes
- Momentary Push button (Mode and Scroll)
Instantaneous information about the machine condition and lifetime totals are displayed by the IC monitoring system. The IC monitoring system will display information via 3 gauges, 18 alert indicators, and two digital windows. The two digital windows are the Service Hour Meter and the Digital Display window.
If a Warning Event occurs, a lamp will illuminate on the IC. An audible alarm will alert the operator of a Level III warning.
When the engine key start switch is turned on, the IC monitoring system continuously monitors the following machine systems:
- Sensors
- Electronic Control Module
- Components of the IC Monitoring System