Air Shutoff - Disassemble
Disassembly Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Reposition the shaft assembly for air shutoff (6) in order to access bolts (1). Remove bolts (1) and valve assembly (2) .
Show/hide table
Illustration 1 | g01184781 |
Show/hide table
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
- Reposition the shaft assembly for air shutoff (6) and remove the shaft assembly for air shutoff (6) from air shutoff housing (4) .
- Remove seal (5) and bearings (3) from air shutoff housing (4) .
Caterpillar Information System:
2005/07/01 Diagnostic Codes for the Fuel Pressure Sensor {1718, 7620}
C6.6 Engines for Caterpillar Built Machines Crankshaft Seals
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Assemble
3456 Generator Sets Manual Stop Procedure
ES12F, UPS 1000S and UPS 1200S Uninterruptible Power Supplys Device Bus Network - Modbus Communications
3456 Generator Sets Starting the Engine - EMCP 3 (If Equipped)
3618 Engine Auxiliary Water Pump - Assemble
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Disassemble
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Install
C-12 Generator Set Engine CID 0091 FMI 08 Throttle Position signal abnormal
C15 On-Highway Engine Fuel System - Prime
TH48-E80 Oil/Gas Transmission Lockup Clutch and Solenoid Valve (Torque Converter) - Remove
3126B Petroleum Engine Air Shutoff - Assemble
784C and 785C Off-Highway Truck/Tractors Match Tire Size - Dual Tire Configuration
3126B Petroleum Engine Air Shutoff - Install
2005/07/18 A Improved Gasket is Now Available {1151, 1162}
Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470} Supplemental Parts and Service Information for the C18 Marine Propulsion Engine {1901, 7470}
2005/07/01 A Improved Gasket is Now Available {1151, 1162}
C7 and C9 On-Highway Engines Engine Rating Parameters
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
TH48-E80 Petroleum Transmission Power Train Electronic Control System MID 027 - CID 0700 - FMI 02
G3500 Engines Model View Illustrations
C7 and C9 Marine Engines Engine Cranks but Will Not Start
C13 and C15 On-highway Engines ECM Memory - Test