Tip-Over Protective Structure (TOPS) - Inspect
Show/hide table
| |
| Illustration 1 | g01171594 |
Inspect the Tip Over Protection Structure (TOPS) for bolts that are loose, damaged or missing. Replace any bolts that are loose, damaged, or missing with original replacement parts only. Torque the M14 bolts to
Note: Apply thread lock to all bolt threads for the TOPS before you install the bolts.
Do not weld reinforcement plates to the TOPS in order to straighten the TOPS. Do not weld reinforcement plates to the TOPS in order to repair the TOPS.
Consult your Caterpillar dealer for repairs of any cracks in the TOPS.
Consult your Caterpillar dealer for an inspection of the TOPS if an incident occurs.
Caterpillar Information System:
M318C and M322C Excavators Engine Supplement Electric Starting Motor - Remove and Install
M325D MH Material Handler Cab Door
M325D MH Material Handler Storage and Literature Compartment
M325D MH Material Handler Monitoring System
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Travel Alarm - Test
C4.4 Industrial Engine Engine Starting
C4.4 Industrial Engine Burn Prevention
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Remove
Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638} Replacing Tooth Holders on the Rotary Cutter Drum for the HM312 and HM315{0751, 6638}
2014/08/01 A New Fuel Transfer Pump Has Been Released {1256}
325C LCR Excavator Machine Systems Platform - Install
C9 Generator Set Fuel System Primary Filter (Water Separator) Element - Replace
301.6C and 301.8C Mini Hydraulic Excavators Machine Systems Pilot Valve (Joystick) - Install
325D and 329D Excavators Hydraulic System Swivel
301.6C, 301.8C and 302.5C Mini Hydraulic Excavators Swing Frame and Cylinder Bearings - Lubricate
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Pilot Valve (Joystick) - Assemble
Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000} Supplemental Product Support Literature for a Factory Installed 20 kW Right Front Corner Mounted Generator Set ( 247-5442 Hydraulic Generator Arrangement) and the Operation Instructions {1404, 1408, 4450, 5057, 5070, 7000}
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Gear Pump (Pilot) - Assemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Disassemble
302.5C Mini Hydraulic Excavator Machine Systems Main Hydraulic Pump - Assemble
330D and 336D Excavators Specifications
320D Excavator Fuses - Replace