3500 Engines Caterpillar


Auxiliary Water Pump - Disassemble

Usage:

3516C 9F4

拆解步骤

开始:

  1. 拆卸辅助水泵。


    图 1g03505607

  1. 从壳体组件 (3) 上拆下螺栓 (1) 和接头 (2)。 从转接接头 (2) 上拆下 O 形密封圈。


    图 2g03505611

  2. 将塞 (4)、O 形密封圈、塞 (5) 和塞 (6) 从壳体 (3) 上拆下。


    图 3g03505714

  3. 将螺栓 (7) 和垫圈从止推垫圈 (8) 上拆下。 卸下止推垫圈 (7)。

    注: 新式止推垫圈可能会与轴承干涉,不能在此时拆下。



    图 4g03505720


    图 5g03505743

  4. 使用适当的压具将轴组件 (9)、叶轮 (10)、轴承 (11) 和止推垫圈 (8) 从壳体 (3) 上拆下。


    图 6g03505757

    ------ WARNING! ------

    弹簧加压的零件和/或盖板可能导致人身伤害。

    拆卸盖板时弹簧力将被释放。

    松动螺栓时做好准备把持住弹簧加载的盖板。


  5. 拆下叶轮 (10)。 拆下弹簧 (11)、挡圈组件 (12)、陶瓷密封件 (13)。 将橡胶密封和陶瓷密封 (14) 从壳体 (3) 上拆下。


    图 7g03505898

  6. 将油封 (15) 和塞 (16) 从壳体 (3) 上拆下。

Caterpillar Information System:

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736} Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
3508C, 3512C and 3516C Marine Engines Auxiliary Water Pump - Remove
DE Series Generator Set with Cat C1.1, C1.5, and C2.2 Engines Generator Lead Connections
2005/04/25 Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
C1.5 GEN SET Electric Power Generation Refill Capacities and Recommendations
2013/09/27 Test Kit Allows Technician to Check Air Systems with Bendix Air Compressors {0701, 1803}
Electronic Installation Guide{1000} Electronic Installation Guide{1000}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201} Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
2005/02/21 Information Release Memo, PELJ0481 , "Product Line Expansion for Caterpillar Low and Medium Pressure Hose and Coupling Products" {5057}
C9 Urban Transit Bus Engine Air Compressor - Remove and Install
PM820, PM822, and PM825 Cold Planer Roading the Machine
2005/01/31 The Connections for Engine Lockout Must be Wired in order to Start the Engine {1450}
3500 Engines Auxiliary Water Pump - Assemble
3508B, 3512B and 3516B Generator Set Engines Exhaust Elbow - Remove and Install
374F Excavator Bucket Linkage - Inspect/Adjust
C15 and C18 Engines for Caterpillar Built Machines Diagnostic Codes
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C27 and C32 Engines for Caterpillar Built Machines E194 High Exhaust Temperature
C27 and C32 Generator Set Engines E361 High Engine Coolant Temperature
C27 and C32 Engines for Caterpillar Built Machines E362 Engine Overspeed
345C MHPU Mobile Hydraulic Power Unit Hydraulic System Fan Motor (Hydraulic and Radiator Cooling)
C27 and C32 Engines for Caterpillar Built Machines E360 Low Engine Oil Pressure
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Remove
3508C, 3512C and 3516C Marine Engines Engine Oil Pump - Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.