Turbocharger - Disassemble - Single Turbocharger
拆解步骤
开始:
- 拆下涡轮增压器。 请参阅拆解和组装, "涡轮增压器 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 标记三个涡轮增压器壳体以便在组装时对齐标记。
Show/hide table
 | |
| 图 1 | g01071634 |
- 卸下螺栓 (2) 。
- 从阀芯组件 (4) 拆下压气机壳体 (1) 和扩散板 (3) 。 压气机壳体的重量约为 63 kg (140 lb)。
- 拆下螺栓 (6) 。
- 从阀芯组件 (4) 上拆下涡轮机壳体 (7) 和喷嘴环 (5) 。 涡轮机壳体的重量约为 70 kg (155 lb)。 阀芯组件的重量约为 100 kg (220 lb)。
Caterpillar Information System:
3406E, C-10 and C-12 On-highway Engines Idle Shutdown Timer - Test
12M Motor Grader Circle Drive Pinion Teeth - Lubricate
12M Motor Grader Centershift Cylinder Socket - Lubricate
C15 and C18 Industrial Engines Flywheel Housing
12M Motor Grader Centershift Cylinder Socket - Check/Adjust/Replace
C11 and C13 Petroleum Engines Engine Support (Front)
3406E and 3456 Generator Set Engines Flywheel Housing
C-9 Engine for the 330C Excavator and for the 330C Mobile Hydraulic Power Unit Engine Misfires, Runs Rough or Is Unstable
2004/08/01 The Oil Level Gauge (Dipstick) has been Improved {1326}
3176C and 3196 Engines for Caterpillar Built Machines Flywheel
Generator Set Start Module (AC Input) Troubleshooting
Generator Set Start Module (AC Input) Model View Illustrations
3406E, C-10 and C-12 On-highway Engines PTO Shutdown Timer - Test
G3520C and G3520E Generator Set Engines Turbocharger - Assemble - Single Turbocharger
12M Motor Grader Circle Top - Lubricate
3176C and 3196 Engines for Caterpillar Built Machines Engine Oil Pump
C7 Engines for Caterpillar Built Machines Unit Injector Hydraulic Pump
3512B and 3516B High Displacement Locomotive Engines Engine Mounts - Check
C11 and C13 Industrial Engines Camshaft
C11 and C13 Industrial Engines Camshaft
12M Motor Grader Cutting Edges and End Bits - Inspect/Replace - Includes Overlays
C15 and C18 Industrial Engines Fuel Transfer Pump
3406E, C-10 and C-12 On-highway Engines Ignition Key Switch Circuit and Battery Supply Circuit - Test
C13, C15, and C18 Tier 4 Final Engines Crankshaft