A New Service Manual, RENR2495, "3600 Engines PanelView Monitor" is Available {0374}
- Engine:
- 3606 (S/N: 8RB1-UP)
- 3608 (S/N: 6MC1-UP)
- 3612 (S/N: 9RC1-UP; 9FR1-UP; 2NZ1-UP)
- 3616 (S/N: 1PD1-UP; 1FN1-UP)
- 3618 (S/N: 2MW1-UP)
A new Service Manual, RENR2495, "3600 Engines PanelView Monitor" is available for the following Engine Monitoring Control Groups :
These Engine Monitoring Control Groups are used as the standard displays in the monitoring systems for the serial numbers that are listed above. This manual contains detailed information on the following topics:
- Specifications
- Operation
- Installation
- Setup
- Testing and adjusting
- Troubleshooting
Paper copies of the Specifications, Systems Operation, Testing and Adjusting, RENR2495, "3600 Engines PanelView Monitor" are available through normal channels for literature distribution. This service manual is also available for electronic distribution in the Service Information System (SIS).
Caterpillar Information System:
2003/01/01 New Ignition Control Groups Are Available And A New Wiring Harness Is Available To Connect The Ignition Control Group To The Display Module For The Caterpillar Ignition System (CIS) {1550}
2003/02/01 A New Spark Plug Is Available For Use In Applications That Use Bio-Gas Fuel {1555}
3126B and 3126E On-highway Engines PTO Switch ON Lamp Circuit - Test
3406E, C12, C15 and C18 Marine Engines Engine Speed/Timing Sensor - Calibrate
3056E Industrial Engine Fuel Injection Pump - Install
3056E Industrial Engine Fuel Injection Pump - Remove
3054E Industrial Engine Fan Drive - Remove and Install
C18 Generator set and C18 Marine Engines Vibration Damper and Pulley - Remove and Install
C7 and C9 On-Highway Engines Transmission (AT/MT/HT) Relay Circuit - Test
C9 Marine Auxiliary and Generator Set Engines Heat Exchanger - Inspect
C9 Marine Auxiliary and Generator Set Engines Fuel System Secondary Filter - Replace
UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Bearing Retainer - Remove and Install
2003/01/01 227-4236 Electrical Cable is Available {4459}
2003/02/01 Correction to Systems Operation/Testing and Adjusting, RENR5908-01 , "Procedure for Engine Timing" {1000, 1900}
2003/02/01 Correction to Troubleshooting, RENR5910-01 , "Engine Speed/Timing Sensor" {1907, 1912}
C7 and C9 On-Highway Engines Engine/Gear Parameters
3054C Industrial Engine Aftercooler Core - Clean/Test
C9 Urban Transit Bus Engine Noise from Injectors with Key Switch ON
3126B Truck Engine Safety Messages
3126B Truck Engine Maintenance Interval Schedule - Engines With a Shallow Oil Sump
3126B Truck Engine Maintenance Interval Schedule - Engines With a Deep Oil Sump
G3500B Engines Power Supply
C9 Urban Transit Bus Engine Cooling System - Test
C9 Urban Transit Bus Engine Water Pump - Test