Air Brake Fittings
Show/hide table
Ilustrasi 1 | g01848737 |
Letakkan mur (1) dan selongsong (2) di pipa. Dorong pipa ke counterbore bodi fitting sejauh mungkin. Ada dua metode yang dapat digunakan untuk mengencangkan mur. Kencangkan mur dengan salah satu metode berikut.
- Kencangkan mur (1) dengan torsi yang telah ditentukan dalam Tabel 1.
- Kencangkan mur (1) dengan jumlah putaran yang telah ditentukan dalam Tabel 1. Jumlah putaran tersebut adalah putaran setelah mur dikencangkan sekuat jari.
Show/hide table
Diameter Luar Nominal Pipa     | Torsi     | Pengencangan Putaran     | |
Tabung Non-logam | Tabung Tembaga     | ||
6,35 mm (0,250 in)     |
11 ± 3 N·m (97 ± 27 lb in)     |
3     | 2     |
9,53 mm (0,375 in)     |
20 ± 3 N·m (175 ± 27 lb in)     |
4     | 2     |
12,70 mm (0,500 in)     |
35 ± 6 N·m (26 ± 4 lb ft)     |
4     | 2     |
15,88 mm (0,625 in)     |
40 ± 6 N·m (30 ± 4 lb ft)     |
3 1/2     | 3     |
19,05 mm (0,750 in)     |
50 ± 6 N·m (37 ± 4 lb ft)     |
3 1/2     | 3     |
Catatan: Bersihkan konektor dan seal serta lumasi konektor dan seal menggunakan Oli Mineral Refrigerant. Ini adalah oli khusus yang kompatibel dengan R−134a.
Caterpillar Information System:
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
G3500B Engines Electronic Control Module (ECM) - 20 Cylinders
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
C9 Urban Transit Bus Engine Customer Specified Parameters Table
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C-15 Truck Engine Wastegate Solenoid
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Torque Specifications Bulkhead Nuts
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System
3512B Marine Auxiliary Engine Manual Barring Group - Air Interlock
C-18 Truck Engines Engine Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
C-15 Truck Engine Electric Starting Motor
C-18 Truck Engines Customer Specified Parameters
797 and 797B Off-Highway Truck Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System
2002/08/01 Guidelines for Water Pump Visual Inspection {1361}
G3500B Engines Crankshaft Position for Valve Lash Setting