Electronic Control Module (ECM) - 20 Cylinders
Show/hide table
Illustration 1 | g00908980 |
There are two terminal boxes on the G3520B engine. (1) Terminal box for the master ECM (2) Terminal box for the slave ECM |
Show/hide table
Illustration 2 | g00828076 |
ECM in a terminal box for generator sets |
Show/hide table
Illustration 3 | g01089866 |
ECM in a terminal box for industrial application |
The master Electronic Control Module (ECM) controls most of the engine's functions. The module is an environmentally sealed unit that is in an engine mounted terminal box. The ECM monitors various inputs from sensors in order to activate relays, solenoids, etc at the appropriate levels. The master ECM supports the following primary functions:
- Start/stop control
- Control of ignition for the left bank
- Governing of the engine
- Air/fuel ratio control
- Monitoring of the detonation sensors on the left bank
- Monitoring of the electrical system
- Monitoring of engine operation
The slave ECM supports the following functions:
- Control of ignition for the right bank
- Monitoring of the detonation sensors on the right bank
Neither ECM has a removable personality module. The software is changed by the flash programming of a file via the Caterpillar Electronic Technician (ET).
Caterpillar Information System:
2002/08/01 2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is now available {0785}
C9 Urban Transit Bus Engine Customer Specified Parameters Table
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Filter
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Relief Valve
C9 Marine Auxiliary and Generator Set Engines Aftercooler Condensate Drain Valve - Inspect/Clean
C-15 Truck Engine Wastegate Solenoid
C-10 and C-12 Truck Engines Fuel System
Installation of Double Lip Wiper Seal{7562} Installation of Double Lip Wiper Seal{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562} Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
C-15 Truck Engine Fuel Filter Base
C-10, C-12 and C-15 On-highway Engines Customer Specified Parameters Table
3500B Engines and 776D, 777D, 784C, 785C, 789C, 793C and 793D Off-Highway Truck/Tractors Camshaft Bearing Position
2002/08/01 Relocation Of The Service Center For 3600 Fuel Injectors {1254}
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Alternator and Regulator
Torque Specifications Air Brake Fittings
Torque Specifications Bulkhead Nuts
Torque Specifications Ground Engaging Tool (G.E.T.) Fasteners
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Electrical System
3512B Marine Auxiliary Engine Manual Barring Group - Air Interlock
C-18 Truck Engines Engine Operation
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Fuel System - Prime
C-15 Truck Engine Electric Starting Motor
C-18 Truck Engines Customer Specified Parameters
797 and 797B Off-Highway Truck Power Train Electronic Control System Electronic Control Module (ECM) - Flash Program