Boost Pressure Sensor - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect boost pressure sensor (1) from the engine wiring harness.
- Remove boost pressure sensor (1).
Show/hide table
| |
| Illustration 1 | g00621576 |
|
Typical example | |
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install boost pressure sensor (1). Tighten the sensor to a torque of
10 ± 2 N·m (90 ± 20 lb in) . - Connect boost pressure sensor (1) to the engine wiring harness.
Show/hide table
|
| |
| Illustration 2 | g00621576 |
|
Typical example | |
Caterpillar Information System:
3406E On-Highway Engine Inlet Air Temperature Sensor - Remove and Install
3406E On-Highway Engine Atmospheric Pressure Sensor - Remove and Install
3406E On-Highway Engine Fuel Temperature Sensor - Remove and Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Serial Number Plate
26SI Series Alternator Component Description
3406E On-Highway Engine Engine Support (Front) - Remove and Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines Schematics and Wiring Diagrams
3512B Marine Auxiliary Engine Low RPM Indicator
C-15, C-16 and C-18 Truck Engines Accessory Drive - Assemble
26SI Series Alternator General Information
3512B Marine Auxiliary Engine Permanent Timing Calibration Sensor
3524B Engine for Caterpillar Built Machines Crankshaft Rear Seal and Wear Sleeve - Install
3512B Marine Auxiliary Engine Cooling System Operation
On-Highway Engines Electronic PTO Installation and Application Guide Switches
26SI Series Alternator Normal Operation
3512B Marine Auxiliary Engine Before Starting Engine
3512B Marine Auxiliary Engine Fuel Conservation Practices
26SI Series Alternator T1 Alternator Output - Test
26SI Series Alternator T2 Electrical System Current - Test
26SI Series Alternator T3 Charging System - Test
26SI Series Alternator T4 Alternator Drive System - Check
26SI Series Alternator T5 Alternator Current - Test
26SI Series Alternator T6 Residual Magnetism Restoration
26SI Series Alternator T7 Identifying Source of Current Draw - Test