Fuel Conservation Practices
The efficiency of the engine can affect the fuel economy. Caterpillar's design and technology in manufacturing provides maximum fuel efficiency in all applications. Follow the recommended procedures in order to attain optimum performance for the life of the engine.
- Avoid spilling fuel.
Fuel expands when the fuel is warmed up. The fuel may overflow from the fuel tank. Inspect fuel lines for leaks. Repair the fuel lines, as needed.
- Be aware of the properties of the different fuels. Use only the recommended fuels.
- Avoid unnecessary idling.
Shut off the engine rather than idle for long periods of time.
- Keep the screens for the inlet air clean.
- Ensure that the turbochargers are operating correctly so that the proper air/fuel ratio is maintained. Clean exhaust indicates proper functioning.
- Maintain a good electrical system.
- Ensure that all of the connections of the hoses are secure.
- Ensure that the driven equipment is in good working order.
- Cold engines consume excess fuel. Utilize heat from the jacket water system and the exhaust system, when possible. Keep cooling system components clean and keep cooling system components in good repair. Never operate the engine without water temperature regulators. All of these items will help maintain operating temperatures.
Caterpillar Information System:
3512B Marine Auxiliary Engine Before Starting Engine
26SI Series Alternator Normal Operation
On-Highway Engines Electronic PTO Installation and Application Guide Switches
3512B Marine Auxiliary Engine Cooling System Operation
3406E On-Highway Engine Boost Pressure Sensor - Remove and Install
3406E On-Highway Engine Inlet Air Temperature Sensor - Remove and Install
3406E On-Highway Engine Atmospheric Pressure Sensor - Remove and Install
3406E On-Highway Engine Fuel Temperature Sensor - Remove and Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Serial Number Plate
26SI Series Alternator Component Description
3406E On-Highway Engine Engine Support (Front) - Remove and Install
Electronic Modular Control Panel II (EMCP II) For MUI Engines Schematics and Wiring Diagrams
26SI Series Alternator T1 Alternator Output - Test
26SI Series Alternator T2 Electrical System Current - Test
26SI Series Alternator T3 Charging System - Test
26SI Series Alternator T4 Alternator Drive System - Check
26SI Series Alternator T5 Alternator Current - Test
26SI Series Alternator T6 Residual Magnetism Restoration
26SI Series Alternator T7 Identifying Source of Current Draw - Test
26SI Series Alternator T8 Alternator Overcharging - Test
26SI Series Alternator Initial Troubleshooting Procedure
3512B Engine Engine Oil and Filter - Change
26SI Series Alternator General Information
26SI Series Alternator Component - Test