Crankcase Breather - Remove and Install
Removal Procedure
- Unlatch the engine hood. Raise the engine hood.
Show/hide table
Illustration 1 | g00278210 |
- Loosen hose clamp (1). Disconnect outlet hose (2) from breather (3) .
Show/hide table
Illustration 2 | g00561395 |
- Loosen four bolts (4). Remove breather (3) and the gasket.
- Replace the engine crankcase oil breather (3) .
Note: Refer to Operation and Maintenance Manual, "General Hazard Information" for information on containing fluid spillage.
Installation Procedure
- Inspect the gasket. If the gasket is damaged, install a new gasket.
- Install the gasket and the breather (3). Tighten four bolts (4) to 12 ± 3 N·m (8.9 ± 2.2 lb ft).
Show/hide table
Illustration 3 | g00561395 |
- Connect hose (2) to breather (3). Tighten hose clamp (1) .
- Close the engine hood. Latch the engine hood.
Caterpillar Information System:
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Relief Valve (One-Way Hydraulic Flow)
C27 PET GEN SET Electric Power Generation and C27 KNOCKDOWN K Petroleum Power Train Package Fuel Conservation Practices
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Remove
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Fuel Shutoff Solenoid
3064 and 3066 Engines for Caterpillar Built Machines Cylinder Head - Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Pilot Control Valve (Auxiliary)
365B and 365B Series II Excavators Supplement for 3196 Engine Expansion Tank - Remove and Install
3064 and 3066 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Install
3126B Engine for Caterpillar Built Machines Coolant Temperature Sensor
3176C and 3196 Engines for Caterpillar Built Machines Fuel Temperature Sensor - If Equipped
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Remove
Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068} Guidelines for the Use of Clean Out Filters for the Hydraulic Oil System and for the Power Train Oil System{3067, 5068}
5230B Excavator Fire Extinguisher Location
365B, 365B Series II, 365BL and 365BL Series II Excavators Machine Systems Drift Reduction Valve (Stick) - Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Aftercooler
3064 and 3066 Engines for Caterpillar Built Machines Engine Oil Pan - Remove and Install
LR15 and LR18 Landscape Rakes Mounting Bracket - Inspect
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Filler - Remove and Install
3114, 3116 and 3126 Industrial, Marine and Generator Set Engines Air Inlet Heater
3003, 3013, 3014 and 3024 Engines for Caterpillar Built Machines Engine Oil Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines Fuel Injection Pump Housing - Assemble
365B and 365B Series II Excavators Supplement for 3196 Engine Engine Oil Level Gauge (Dipstick) - Remove and Install