Engine Oil Filter Base - Remove
Removal Procedure
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
- Loosen two hose clamps (1) and disconnect the hoses.
Show/hide table
Illustration 1 | g00554000 |
Typical example |
- Remove three bolts (2) .
- Remove nut (3) that holds the hose clamp and move the hose clamp.
- Remove engine oil filter base (4) from the engine block. Plug all openings immediately.
Caterpillar Information System:
Generator Set Control Panel for Switchgear Conversion Initial Troubleshooting Procedure
3054 Engine for Caterpillar Built Machines Cylinder Liner - Install
3054 Engine for Caterpillar Built Machines Cylinder Liner - Remove
Generator Set Control Panel for Switchgear Conversion Troubleshooting Diagnostic Codes
SR4 HV and SR4B HV Generators Insulation - Test
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Install
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Remove
Generator Set Control Panel for Switchgear Conversion Accessing Diagnostic Information
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist)
3408E and 3412E Engines for Caterpillar Built Machines Front Cover - Remove
Generator Set Control Panel for Switchgear Conversion Units Mode
Generator Set Control Panel for Switchgear Conversion LH/RH Switch - Troubleshoot
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Install
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Disassemble
Control Console For CPS361 Pumper, Cement General Information
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Assemble
Generator Set Control Panel for Switchgear Conversion Scroll Switch - Troubleshoot
Jacket Water Heaters, Lube Oil Heaters, and Combination Heaters for G3600, 3600, and C280 Engines Electrical System Schematic
Generator Set Control Panel for Switchgear Conversion System Self Test
Generator Set Control Panel for Switchgear Conversion Module - Replace
3608 Engine Engine Oil Pan - Assemble
Generator Set Control Panel for Switchgear Conversion Main Display Module Initialization - Adjust
Generator Set Control Panel for Switchgear Conversion Indicator for Overcrank - Troubleshoot