Front Cover - Remove
Start By:
- Remove the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
Note: The fuel filter base should be removed only if it is necessary in order to remove the front cover. Some engine arrangements do not require the removal of the fuel filter base.
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove ten bolts (1). Remove nut (3).
Show/hide table
Illustration 2 g00555863 Typical example - Remove nut (4) and the washer.
- Remove cover (2) and the gasket.
Show/hide table
Illustration 1 | g00553898 |
Typical example |
Caterpillar Information System:
Generator Set Control Panel for Switchgear Conversion Units Mode
3054 and 3056 Industrial and Generator Set Engines Engine Oil Pump
3054 Engine for Caterpillar Built Machines Crankshaft Pulley - Remove and Install
3608 Engine Engine Oil Pan - Disassemble
Generator Set Control Panel for Switchgear Conversion Tattletale Mode
3054 and 3056 Industrial and Generator Set Engines Engine Oil Cooler - Install
3054 Engine for Caterpillar Built Machines Engine Oil Relief Valve - Remove and Install
G3606 and G3608 Engines Engine Oil Pan - Install
3412E and C30 Marine Engines Walk-Around Inspection
3054 Engine for Caterpillar Built Machines Crankshaft Main Bearings - Remove
3054 and 3056 Industrial and Generator Set Engines Cylinder Head Valves
G3606 and G3608 Engines Engine Oil Pan - Remove
797 Off-Highway Truck Hydraulic System Relief Valve (Hoist)
3408E and 3412E Engines for Caterpillar Built Machines Valve Mechanism Cover Base - Remove and Install
Generator Set Control Panel for Switchgear Conversion Accessing Diagnostic Information
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Remove
3054 and 3056 Industrial and Generator Set Engines Water Outlet Manifold - Install
SR4 HV and SR4B HV Generators Insulation - Test
Generator Set Control Panel for Switchgear Conversion Troubleshooting Diagnostic Codes
3054 Engine for Caterpillar Built Machines Cylinder Liner - Remove
3054 Engine for Caterpillar Built Machines Cylinder Liner - Install
Generator Set Control Panel for Switchgear Conversion Initial Troubleshooting Procedure
3054 Engine for Caterpillar Built Machines Engine Oil Filter Base - Remove
Generator Set Control Panel for Switchgear Conversion LH/RH Switch - Troubleshoot