3176C and 3196 Engines For Caterpillar Built Machines Caterpillar


Accessory Drive - Disassemble

Usage:

140H 126

拆解步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
3H-0468  拉拔器板 
9S-9155 隔套 
8B-7550 推拉支腿 
5F-7344 块拉拔器 
8H-0663 轴承拉拔器 
5F-7345 螺钉 
1P-1858  挡圈钳 

开始:

  1. 拆卸附件驱动器。 请参阅拆解和组装 , "附件驱动器 - 拆卸"。


    图 1g01062840

  1. 拆下螺栓 (1)。

  2. 从附件驱动装置壳体 ( 5) 上拆除齿轮和轴 ( 2) 以及轴承 (3)。

    注: 齿轮轴的一端比另一端长。 装配前,要确保齿轮轴处于正确的位置。

  3. 使用工具 (A),将轴承 ( 3) 从齿轮和轴 (2) 上拆下。

  4. 使用工具 (E) 将挡圈 ( 4) 从附件驱动装置壳体 ( 5) 上拆下。

Caterpillar Information System:

3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Rear Seal Carrier - Remove and Install
3500 Spark Ignited Engines Piston and Rings
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Install
3176C and 3196 Engines For Caterpillar Built Machines Turbocharger - Remove
3114, 3116 and 3126 MUI Engine Governors Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors Fuel Transfer Pump
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Position Sensor - Remove and Install
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VII)
3176C and 3196 Industrial Engines Compression Brake - Remove
3406C (PEEC III) Truck Engines Basic Block
3114, 3116 and 3126 MUI Engine Governors Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors Governor Bumper Spring (Some Type IV)
3406C (PEEC III) Truck Engines Cooling System
3176C and 3196 Engines For Caterpillar Built Machines Accessory Drive - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Camshaft Gear - Remove and Install
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Gear - Remove and Install
3176C and 3196 Industrial Engines Electronic Control Module - Remove and Install
3500 Spark Ignited Engines Valve Mechanism
3406E On-Highway Engine Engine Oil Filter Base - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Crankshaft Position Sensor - Remove and Install
3176C and 3196 Industrial Engines Compression Brake - Install
G3500B Engines Cylinder Head Valves
3406E On-Highway Engine Engine Oil Pump - Assemble
3176C and 3196 Engines For Caterpillar Built Machines Connecting Rod Bearings - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.