302.5 Mini Hydraulic Excavator Caterpillar


Travel Speed Control

Usage:

302.5 4AZ


Illustration 1g00518097

The high speed switch is located on the right side of the floor in the operator station.

Use the switch to change the travel speed.

Depress the switch with your foot and hold the switch in order to make the machine travel in high speed.

Release the switch in order to return to low speed.

Caterpillar Information System:

3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
A13 Auger Transport Position
A13 Auger Lifting and Tying Down the Work Tool
320B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
302.5 Mini Hydraulic Excavator Heating Control
302.5 Mini Hydraulic Excavator Travel Alarm - If Equipped
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic Oil Contamination - Test
302.5 Mini Hydraulic Excavator Plate Locations and Film Locations
3406E and 3456 Generator Set Engines Fan Drive - Install
3406E On-Highway Engine Fan Drive - Remove
3406E On-Highway Engine Fan Drive - Assemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0808 FMI 09 Interface Module (No. 8) Abnormal Update - Test
3046 Engine For Caterpillar Built Machines Fuel Injection Lines - Remove and Install
302.5 Mini Hydraulic Excavator Blade Operation
3406E On-Highway Engine Engine Oil Pressure Sensor - Remove and Install
320B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
318B Excavator Machine System Specifications Track Roller (Single Flange)
320B Excavator Hydraulic System Pump Control (Negative Flow) - Test
307B Excavator Air Conditioning and Heating Speed Control - Blower Fan Speed
302.5 Mini Hydraulic Excavator Stopping the Machine
302.5 Mini Hydraulic Excavator Lifting Capacities - The Boom Swung 90 Degrees
302.5 Mini Hydraulic Excavator Mirror - If Equipped
302.5 Mini Hydraulic Excavator Storage and Literature Compartment
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.