Engine Oil Pressure Sensor - Remove and Install
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Disconnect harness assembly (2).
- Remove engine oil pressure sensor (1) from the cylinder block.
Show/hide table
Illustration 1 | g00518159 |
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Install engine oil pressure sensor (1) and tighten to a torque of
10 ± 2 N·m (88 ± 18 lb in) . - Connect harness assembly (2).
Show/hide table
Illustration 2 | g00518159 |
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Blade Operation
3046 Engine For Caterpillar Built Machines Fuel Injection Lines - Remove and Install
302.5 Mini Hydraulic Excavator Travel Speed Control
3406E On-Highway Engine Coolant Temperature Sensor - Remove and Install
A13 Auger Transport Position
A13 Auger Lifting and Tying Down the Work Tool
320B Excavator Hydraulic System Pump Control (Output Flow) - Adjust
302.5 Mini Hydraulic Excavator Heating Control
302.5 Mini Hydraulic Excavator Travel Alarm - If Equipped
301.5, 301.6 and 301.8 Mini Hydraulic Excavators Hydraulic Oil Contamination - Test
302.5 Mini Hydraulic Excavator Plate Locations and Film Locations
3406E and 3456 Generator Set Engines Fan Drive - Install
320B Excavator Hydraulic System Pump Control (Negative Flow) - Adjust
318B Excavator Machine System Specifications Track Roller (Single Flange)
320B Excavator Hydraulic System Pump Control (Negative Flow) - Test
307B Excavator Air Conditioning and Heating Speed Control - Blower Fan Speed
302.5 Mini Hydraulic Excavator Stopping the Machine
302.5 Mini Hydraulic Excavator Lifting Capacities - The Boom Swung 90 Degrees
302.5 Mini Hydraulic Excavator Mirror - If Equipped
302.5 Mini Hydraulic Excavator Storage and Literature Compartment
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems Swing Drive - Disassemble
302.5 Mini Hydraulic Excavator Window (Front) - Early Type (If Equipped)
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers Engine Oil in Cooling System
3176C and 3196 Industrial Engines Engine Oil Pressure Sensor - Remove and Install