Electronic Unit Injector Sleeve - Remove
拆卸步骤
Show/hide table
| 所需工具 | |||
|---|---|---|---|
| 工具 | 零件号 | 零件描述 | 数量 |
| A (1) | 128-7889 | 跨接压板拉拔器 | 1 |
| 221-9778 | 拉拔器螺柱 | 1 | |
| 9U-6877 | 止推轴承 | 1 | |
| 5P-8247 | 硬垫圈 | 1 | |
| 4K-0367 | 螺母 | 1 | |
Show/hide table
| ( 1 ) | 9U-6891 喷油器工具总成 的部分工具 |
开始:
- 拆下电子单体喷油器。 请参阅拆解和组装, "电子单体喷油器 - 拆卸"。
Show/hide table
| 注意 |
|---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
- 从冷却系统将冷却液排入合适的容器以便保存或废弃这些冷却液。 请参考操作和保养手册, "冷却系统冷却液 - 更换"。
- 使用工具 (A) 拆下单体喷油器套管 (1) 。
Show/hide table
 | |
| 图 1 | g01002969 |
- 将 O 形密封圈 (2) 从单体喷油器套管 (1) 上拆下。
Show/hide table
 | |
| 图 2 | g00948616 |
Caterpillar Information System:
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 445 FMI 12 Run Relay Failed - Test
3406E On-Highway Engine Electronic Unit Injector Sleeve - Install
3306C Engines for Caterpillar Built Machines Engine Design
3600 Heavy Fuel Engines Exhaust Manifold - Inspect
3612 and 3616 Fast Vessel Engines Alarms and Shutoffs
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 444 FMI 12 Starting Motor Relay Failed - Test
3304B and 3306B Engines for Caterpillar Built Machines Crankshaft Front Seal - Install
G3612 and G3616 Engines Air Inlet and Exhaust System
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 443 FMI 12 Crank Termination Relay Failed - Test
3406E On-Highway Engine Fuel Transfer Pump - Remove
P16, P20, P25, P28, P40 and P60 Pulverizers Pulverizer Cylinder
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 441 FMI 12 Electronic Governor Relay Failed - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 446 FMI 12 Air Shutoff Relay Failed - Test
3306B Industrial Engine Fuel Injection Pump
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 447 FMI 12 Fuel Control Relay Failed - Test
G3612 and G3616 Engines Engine Timing Procedures
Electronic Modular Control Panel II (EMCP II) For MUI Engines CID 500 FMI 12 EMCP Electronic Control (Generator Set) Failed - Test
3406C Engines for Caterpillar Built Machines Camshaft
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 566 FMI 7 Unexpected Shutdown Improper Mechanical Response - Test
3406C Engines for Caterpillar Built Machines Cylinder Head Valves
3306B Industrial Engine Fuel Injection Pump Housing
C-10 and C-12 Truck Engines Crankshaft
Electronic Modular Control Panel II (EMCP II) for EUI Engines CID 590 FMI 9 Engine Electronic Control Module Abnormal Update - Test
Electronic Modular Control Panel II (EMCP II) for EUI Engines Symbols