IT14G Integrated Toolcarrier Caterpillar


Bucket Lift Kickout

Usage:

IT14G 1WN

------ WARNING! ------

Use caution to avoid possible personal injury when adjusting the attachment lift kickout.

Keep personnel off the machine. Clear the area when working under or around the attachment linkage.

With the attachment raised, proper support must be provided for the attachment and/or the linkage.

----------------------

  1. Start the engine. Raise the bucket to the desired height and stop the engine.

  1. Block up the bucket and the linkage.



    Illustration 1g00484067

  1. Loosen the magnet clamp. Align the magnet with the switch assembly.

  1. To increase the lift kickout height for the bucket, move the magnet counterclockwise. To decrease the lift kickout height for the bucket, move the magnet clockwise.

  1. Tighten the magnet clamp.

  1. Start the engine. To check the adjustment, move the bucket lift lever to the RAISE detent position.

  1. When the bucket reaches the preset lift height, the bucket lift lever should return to the HOLD position.

Caterpillar Information System:

IT14G Integrated Toolcarrier Parking Brake Control
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Service and Parking Brake (Rear) - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Air Conditioner and Heater Fan Motor - Remove and Install
561M Pipelayer Track Idler
AP-1055B and BG-2455C Asphalt Pavers Tow Arm Joint Nuts - Tighten
AP-1055B and BG-2455C Asphalt Pavers Track Roller Bearings - Lubricate
AP-1055B and BG-2455C Asphalt Pavers Track Takeup Linkage - Lubricate
AP-1055B and BG-2455C Asphalt Pavers Track Tension - Check
AP-1055B and BG-2455C Asphalt Pavers Tracks - Inspect
AP-1055B and BG-2455C Asphalt Pavers Truck Hitch - Lubricate - If Equipped
AP-1055B and BG-2455C Asphalt Pavers Ventilation Blower Wheel - Inspect/Clean
AP-1055B and BG-2455C Asphalt Pavers Ventilation Inlet Ducts - Inspect/Clean
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 05 Solenoid Valve (Upshift) Current Below Normal - Test
24H Motor Grader Power Train Torque Converter
IT14G Integrated Toolcarrier Bucket Positioner
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) Keypad
D250E Series II, D300E Series II, D350E Series II and D400E Series II Articulated Trucks Power Train Electronic Control System CID 0707 FMI 06 Solenoid Valve (Upshift) Current Above Normal - Test
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Oil Sample - Obtain
AP-1050B and BG-245C Asphalt Pavers Pump Drive Oil Level - Check
AP-1055B and BG-2455C Asphalt Pavers Pump Drive Breather - Clean
AP-1055B and BG-2455C Asphalt Pavers Propel System Oil Filters - Replace
561M Pipelayer Track Roller Frame
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Sample - Obtain
AP-1055B and BG-2455C Asphalt Pavers Hydraulic System Oil Level - Check
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.