Disassembly Procedure
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Remove bolts (3) in order to remove solenoid valve (2) from housing (1) .
 | |
| Illustration 1 | g00908176 |
- Remove O-ring seals (4) from housing (1) .
 | |
| Illustration 2 | g00908177 |
- Remove plug (5), O-ring seal (6), spring (7), valve (8), spring (9), and valve (10) from valve housing (11) .
 |
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
 |
 | |
| Illustration 3 | g00908178 |
- Remove bolts (12) in order to remove valve housing (11), spring (13), and piston (14) from housing (1) .
|
Personal injury can result from being struck by parts propelled by a released spring force. Make sure to wear all necessary protective equipment. Follow the recommended procedure and use all recommended tooling to release the spring force. |
|
 | |
| Illustration 4 | g00908180 |
- Remove seals (15) and O-ring seal (16) from piston (14) .
Note: O-ring seals (4), O-ring seal (6), seals (15), and O-ring seal (16) are purchased as a seal kit.
Note: Plug (5), spring (7), valve (8), spring (9), and valve (10) are purchased as a valve kit.
Note: Valve housing (11), spring (13), and piston (14) are purchased as a kit.